Turning Power On and Off |
| Other Useful Features |
|
|
|
Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.
Press POWER to turn on/off the unit.
Initial System Start-Up
Be sure to press the RESET button when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.
1 Turn off the unit power.
2 Press RESET with a
RESET
Lowering Volume Quickly
Activating this function will instantly lower the volume level.
Press MUTE.
No volume is output.
Pressing MUTE again brings the audio back to its previous level.
Switching a Source
Press SOURCE.
•Source can be switched by setting FRONT on the VIDEO SOURCE SEL screen. Refer to “Switching Each Monitor Source (VIDEO SOURCE SELECT Function)” (this page).
8
g f
9
MUTE
Switching Each Monitor Source (VIDEO SOURCE SELECT Function)
If the optional expansion box
The source is switched between the external front monitor and the external rear monitor using the VIDEO SOURCE SELECT function.
1 Press and hold MUTE for at least 2 seconds.
The SETUP screen is displayed.
2 Press 8 or 9 to select VIDEO SOURCE SEL. 3 Press
The VIDEO SOURCE SEL. screen is displayed.
4 Press 8 or 9 to select a monitor from which the source of FRONT/REAR 1/REAR 2 is set.
FRONT: External front monitor
REAR 1: External rear monitor connected to AUX OUT1 of the optional expansion box (VPE- S431).
REAR 2: External rear monitor connected to AUX OUT2 of the optional expansion box (VPE- S431).
5 Press gor fto select the desired source.
6 To return to the SETUP screen, select RETURN and press
To finish the setting, press and hold MUTE for at least 2 seconds.