Panasonic DMW-MCTZ3 Cleaning and Storing, Wash the outside of the Case with water

4 Remove the O-ring from the Case and check that there is no debris, etc. in the O-ring groove.

5 Check that there are no scratches etc. on the O-ring while you are applying the grease.

∫Notes

Be careful when removing the digital camera from the Case so that it does not get wet.

≥Remove the camera with clean hands. (Wash your hands with fresh water and then thoroughly dry them.)

≥Thoroughly dry any moisture on your body or hair. (Be particularly careful about any water coming from the sleeves of your thermal suit.)

≥When the weather or the sea is particularly bad, select a place where the digital camera will not get wet e.g. indoors or where there is a roof overhead.

Cleaning and Storing

1 Wash the outside of the Case with water.

≥Wash the outside of the Case until it is clean. (P20)

≥Be sure to close the Case and then wash the outside with only water.

≥Wipe off any dirt inside the Case with a wet, soft cloth.

∫Notes

≥Do not wash the Case with pressurized water as it may cause water leakage. Remove the digital camera before washing the Case with water.

≥Do not leave the digital camera inside the Case when storing it.

≥Store the Case in a cool, well-ventilated place.

Caution for Use

∫Handling of the O-ring

≥Do not use alcohol, thinner or a chemical cleaning agent for cleaning the O- ring. This will cause damage to, or deterioration of, the O-ring.

≥If you will not be using the Case for a long period of time, remove the O-ring from the O-ring groove, apply a thin coat of grease (supplied), place it in a clean polyester bag and then store it in a cool, dark place to prevent the surface from being damaged. When you use the O-ring again, thoroughly check that it is not scratched or split.

21

VQT1F25