Aastra Telecom 4223 manual Conference Call with N Participants

Operations during a Call

	In every case, the procedure is the same:
Transfer	Press the Transfer key to transfer the call in handsfree mode.
d	Or, simply replace the handset when in handset mode.
	In either case, the call is transferred, and the two parties disappear
	from your extension.
		Notes:
		If there are more than 2 parties on your telephone, the call
		transfer will be carried out between the party currently con-
		versing with you, and the last party who was placed on hold.
		Call transfers between two external parties may also be
		permitted. This essentially depends on your facility’s
		configuration. If you need more information, contact your
		system administrator.
		Your facility may allow call transfers between two external
		parties; however, it is recommended to never transfer to an
		automatic machine such as: an information system, a net-
		work voicemail system, etc. The connection could be very
		long and costly. Moreover, during the entire duration of the
		transfer, two of your facility’s ISDN network lines are busy,
		which may limit other calls.
	Conference Call with N Participants
	When an enquiry call is established, i.e. when you are carrying on a
	conversation with one party while another is on hold, you may also
	decide to establish a 3-way conference call including your two calling
	parties and yourself.
	To do so, whether you are carrying on a conversation using the
	handset or handsfree mode:
	FRI 20-APR 03:31:00 PM
	L2 WESSON Paul-407		02:53
	DTMF	CONFERENC INFO_COMM	CALL_PARK >
CONFERENC	Press the dynamic function key shown on the left.
	The 3-way conference call is established, and your extension’s
	screen will be as illustrated below:
	Conference
	L2 WESSON Paul-407		03:23
	DTMF	INFO_COMM	CALL_PARK >

40 MD Evolution – Dialog 4223 Professional