Tips and How HRC Works
FIVE : HEART RATE CONTROL WORKOUTS
CRUISE
CONTROL
HOW CRUISE
CONTROL
DETERMINES
HOW TO
CHANGE YOUR
EXCERCISE
INTENSITY
This is the simplest way to enter target heart rate training. While in manual or any program you can enter Target Heart Rate Control by simply pressing the Target HRC/Cruise Control key. Your current heart rate will be set as the target.
For best results, you should be at least five minutes into your workout and warmed up. This will allow Cruise Control to more accurately control your heart rate.
Remember, you must be wearing a chest strap, and your heart rate should be displayed in the Heart Rate window.
To change your target heart rate press 
. Edit the target using 
and press 
. If you are lowering your target, you are limited to a 5 bpm change. It is important to note that if you are raising your target, the speed and grade change safety limits (described next) may prevent the treadmill from raising your heart rate to your desired new target.
If you enter the HRC stage below 5 mph, the speed you enter will be the maximum speed of your workout. If you like to walk at a maximum speed of 3.8 mph, you should enter HRC at 3.8 mph.
If you enter the HRC stage above 5 mph, you will have an additional 1 mph of speed. If you enter HRC at 6 mph, your maximum attainable speed in the HRC stage will be 7 mph.
If at any time you enter the HRC stage with incline, you will have an additional 4% of incline available in the HRC stage. If you enter the HRC stage at 1% incline, your maximum attainable incline will be 5%.
If you do not enter the HRC stage with incline, no incline will be available during the HRC stage of your workout. Only speed will be used to control your heart rate.
HEART RATE CONTROL WORKOUTS
Z 7 Tr e a d m i l l O w n e r ' s G u i d e
39