NordicTrack NTL99030 user manual Assembly requires two people, 100 102 Worn

ASSEMBLY

Assembly requires two people.	Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.		Assembly requires the included allen wrench
and your own phillips screwdriver	and wire cutters	.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the		1
Uprights (69) until the treadmill is in the position shown.
Refer to the inset drawing. Insert one of the Extension
Legs (102) into the treadmill as shown. Make sure that			69
the Extension Leg is turned so the Base Pad (99) is be-
neath it. Note: It may be helpful to tip the Uprights (69)
forward as you insert the Extension Leg.
Insert the other Extension Leg (not shown) in the same				69
way.
				102
				99
2. Press the Latch Knob Sleeve (70) into the left Upright (69).		2
Make sure that the Latch Pin Collar (72) and the Spring		68		69
(71) are on the Latch Pin (74). Insert the Latch Pin into			35
the Latch Knob Sleeve (70) and the left Upright (69).
Press the Latch Knob Spacer (35) onto the other side of
the left Upright. Then, tighten the Latch Knob (68) back				70
onto the Latch Pin.				71
				72
				74
3. With the help of a second person, carefully tip the		3
Uprights (69) down as shown.	Make sure that the
Extension Legs (102) remain in the Uprights.
Attach each Extension Leg (102) with two 3/4” Screws			99
(100).
With the help of a second person, carefully tip the
Uprights (69) back to the vertical position.				69
		69
Note: One replacement Base Pad (99) may be included.				100
Use the Base Pad to replace any Base Pad that becomes			100	102
worn.		99
			102

6