NordicTrack CTL49021 user manual Symptom the Walking Belt is OFF-CENTER

Page 35

4.SYMPTOM: THE WALKING BELT IS OFF-CENTER

a. If the walking belt has shifted to the left: Remove the

key and unplug the power cord.Using the included allen

wrench, turn the roller adjustment bolts in the directions shown, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and use the treadmill for a few minutes. Repeat until the walk- ing belt is centered.

b.If the walking belt has shifted to the right: Remove the

key and unplug the power cord.Using the included allen

wrench, turn the roller adjustment bolts in the directions shown, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and use the treadmill for a few minutes. Repeat until the walk- ing belt is centered.

a

b

c.If the walking belt slips when walked on: Remove the

key and unplug the power cord.Using the included allen

wrench, turn both roller adjustment bolts clockwise 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 1 to 2 inches off the walking platform. The center of the walking belt should just touch the walking platform. Make sure to keep the walking belt centered. Plug in the power cord, in- sert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

c

5.SYMPTOM: THE WALKING BELT STOPS OR THE INCLINE CANNOT BE ADJUSTED EVEN THOUGH THE CONSOLE REMAINS LIT

a. This indicates that a controller error may have occurred. To correct the problem, refer to step 8 on page 23.

6.SYMPTOM: THE INCLINE SYSTEM DOES NOT FUNCTION PROPERLY OR THE TREADMILL DOES NOT

APPEAR TO BE AT THE INCLINE LEVEL SHOWN IN THE MAIN DISPLAY

a.The incline system may need to be calibrated. To initiate the calibration routine, hold down the INCLINE + button and the INCLINE – button simultaneously for three seconds. During the calibration routine, the tread- mill will automatically rise to the highest incline level and then return to the lowest incline level.

b.If the incline system still does not function properly, please call Customer Care toll-free.

7.SYMPTOM: THE WORDS LUBRICATE DECK APPEAR EVERY FEW MINUTES IN THE MAIN DISPLAY

a.If the words LUBRICATE DECK appear in the main display, the walking platform should be checked for ade- quate lubricant. Follow the instructions in step 4 on page 29 to lubricate the walking platform if necessary. After you have lubricated the walking platform, refer to HOW TO RESET THE LUBE REMINDER on page 25.

If this is not done, the words LUBRICATE DECK will continue to appear.

34

Image 35

Contents Free at Mon.-Fri., 8 a.m.-5 p.m. MST Model No. CTL49021 Serial NoSerial Number Decal Section OntentsPage Wear appropriate exercise clothes when Use the treadmill only as described in this manualMat under the treadmill Treadmill onNever insert or drop any object into any opening Underside Console Disconnect powerArning Ecal Before servicingFor your benefit, read this manual carefully before Roller Adjustment BoltEfore Readmill Upright Bolts Firmly tighten the eight Handrail BoltsMill Here OW to OVEHandrails Lift Bracket OW to OnnectTric shock Is equipped withHead Audio Cable Phones HOW to Connect Your Portable CD PlayerOW to Page Toll-free Features of the ConsoleMatrix Main Display Help you get the most from your exercise A PolarGetting Started Follow your progress with the matrix Main display HOW to USE the Manual ModeSelect the manual mode 4Change the incline of the treadmill as desiredOn the foot rails Pulse/% MaxMeasure your heart rate if desired StandSelect one of the six preset programs HOW to USE Preset ProgramsWhenkey.the program is completed, remove Restart the program, press the StartMent Refer to onEnter a target heart rate setting HOW to USE PULSE-DRIVEN ProgramsHOW to USE the Fitness Test Program Ten fitness levels fitness level Cally increaseRent four-minute level is completed For speed To the next settings of the CD programNext settings of the CD program May not detect the program signalsHOW to USE the Maintenance Mode HOW to Reset the Lube Reminder To exit the maintenance modePage Page Page Page Reventive Weekly MaintenanceMonthly Maintenance Replacing the Walking Platform Remove the key and unplug Power cordTurning the Walking Platform Removing the Platform ScrewsWalking Platform Turned/Replaced Walking Belt Replaced IX-MONTH ReventiveIX-MONTH Reventive Roubleshooting Symptom the Power does not Turn onSymptom the Power Turns OFF During USE AdjustmentRepeat until the walking belt is properly tightened Symptom the Walking Belt is OFF-CENTERExercise Steps XerciseGuidelines Factors in a Sensible DietToe Touch Stretch Weight Loss Tips4Warm up before you begin Stretch after your warm-upStretch again at the end of your exercise Session Benefits of Aerobic ExerciseGet FIT with NordicTrack 7Cool down after aerobic exerciseWorkout Programs Workout TipsImited State Laws Receipt of Parts and ServiceExclusive Warranty Unauthorized Changes to WarrantyQty Description ART114 100 117 107 101 103 102 Xploded116 119 7420112 104 111 106 120 113 105OW to Rder Eplacement