NordicTrack NCTL15991 Problem The walking belt slows when walked on, Power Cord, Move the key

Page 27

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a CUL-listed surge protector, rated at 15 amps, with a 1mm ft.) or less in length.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 7–10 cm (3–4 in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

2 (14-gauge) cord of 1,5 m (5

b

7-10 cm

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department.

PROBLEM: The walking belt is off-centre or slips when walked on

SOLUTION:

a. If the walking belt has shifted to the left,

first re-

 

move the key and

UNPLUG THE POWER CORD

.

 

Using the allen wrench, turn the left rear roller bolt

 

 

clockwise 1/2 of a turn. Be careful not to overtighten

 

 

the walking belt.

If the walking belt has shifted to

 

 

the right,

turn the left rear roller bolt counterclockwise

 

 

1/2 of a turn. Plug in the power cord, insert the key

 

 

and run the treadmill for a few minutes. Repeat until

 

 

the walking belt is centered.

 

 

b. If the walking belt slips when walked on, first remove

 

 

the key and

 

UNPLUG THE POWER CORD

. Using

 

the allen wrench, turn both rear roller adjustment

 

 

bolts clockwise, 1/4 of a turn. When the walking belt

 

 

is correctly tightened, you should be able to lift each

 

 

side of the walking belt 7–10 cm (3–4 in.) off the

 

 

walking platform. Be careful to keep the walking belt

 

 

centred. Plug in the power cord, insert the key and

 

 

carefully walk on the treadmill for a few minutes.

 

 

Repeat until the walking belt is properly tightened.

 

a

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Mon.-Fri h00 until 18h30 EST excluding holidays QUESTIONS?Model No. NCTL15991 Serial No Serial Number DecalLimited Warranty Table of ContentsWear appropriate exercise clothing when Important PrecautionsUse the treadmill only as described in this manual Keep the treadmill indoors, away from moisPage Right Side Using the treadmillBefore YOU Begin Left SideMake sure that the Lock Pin Collar 72 and the Spring AssemblyAssembly requires two people With the help of a second person, carefully raiseNot tighten the Bolts yet Right Operation and AdjustmentHOW to Plug in the Power Cord TM Walking BeltFeatures of the Console Advanced console offers an impressive selectionMore from your exercise Getting Started Play Select the manual modeDisplays Training Zone disHOW to USE Preset Programs Storage position When the program has ended, remove the keyFollow your progress with the displays Treadmill is at 1%Remove the key HOW to Create Custom ProgramsSelect one of the custom programs On the button will lightPress the Start Program button or the Speed GramSelect the fitness test program HOW to USE the Fitness Test ProgramSor to use the fitness test program see Put on the chest pulse sensorSelect the pulse-driven program HOW to USE the PULSE-DRIVEN Program24 to use the pulse-driven program 1Put on the chest pulse sensorCally YouIf you Cline willHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes Line OUT jack HOW to Connect Your Home StereoHOW to Connect Your Computer Audio 5mm Cable AdapterPrograms HOW to Connect Your VCRTon or the Speed Next settings of the CD or video programIf you are using your portable CD player Tings of the CD or video programBegin walking. During the program, an ele HOW to USE Programs Directly from OUR Internet SiteNext settings of the program Follow the on-line instructions to start ProgramOptional Chest Pulse Sensor Information MODE/DEMO ModeImportant The Heart Rate/Calories display If a d apHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Solution TROUBLE-SHOOTINGIf the walking belt has shifted to the left Problem The walking belt slows when walked onPower Cord Unplug the Power CordFat Burning Conditioning GuidelinesWarm-up Training Zone ExerciseSuggested Stretches Lift Frame Pulse Grip AssemblyUpright Wire Harness Description105 Shock 106 Extension Leg Assembly118 Hand Weight 119 2 Console Screw 103 Extension Cap Thick Base Pad 104 Incline Warning DecalEXP3000 treadmill Ordering Replacement PartsR0702A No. NCTL15991No. NCTL15991
Top Page Image Contents