Gold's Gym GGTL78609.0 manual Next, hold the receiver so that the antenna is

Page 12

If you purchase the optional chest pulse sensor (see page 22), follow the steps below to install the re-
ceiver included with the chest pulse sensor.
1. Make sure that the power cord is unplugged.	1
Remove the indicated #8 x 1/2" Screw (2) from	1
the Access Door (123) on the back of the con-
sole assembly.
			123	Console
		2	123	Assembly
		2
2. Next, hold the receiver so that the antenna is	2
oriented as shown. Peel the paper backing off	2		Receiver
the pad on the bottom of the receiver. Press the			Receiver
receiver onto the Access Door (123) in the loca-				Antenna
tion shown.				Antenna
				123

3.Connect the wire on the receiver to the wire ex- tending from the console assembly. Make sure that no wires are pinched. Reattach the Access Door (123) to the console assembly with the #8 x 1/2" Screw (2). Discard the other wires included with the receiver.

3
	Wires	Console
2	123	Assembly
2

12

Image 12

Contents QUESTIONS? Model No. GGTL78609.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Do not fully fold the Frame yetFul not to pinch the Upright Wire Spacer 92. Be careful not to pinch Upright WireTighten the Nut the Wheel must turn freely Not fully tighten the Bolts yetWheel must turn freely Bar. See the inset drawing. The connectors No wires are pinched. Do not fully tightenConsole assembly. See the inset drawing Should slide together easily and snap intoUprights. Be careful not to pinch any wires 108 Next, hold the receiver so that the antenna is Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Follow your progress with the displays. The matrix-When you DistanceTurn on the fans if desired HOW to USE a Preset Workout Select a preset workoutStart the workout HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout HOW to USE AN Ifit Workout Insert an iFit card and select a workoutInformation Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged Optional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. GGTL78609.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. GGTL78609.0 R0709A Exploded Drawing B-Model No. GGTL78609.0 R0709A Exploded Drawing C-Model No. GGTL78609.0 R0709A 10 101 100 104 124 102 103 105 106 107 108 122 Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT