HOW to USE a Preset Workout

Current Segment

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

2.Select a preset workout.

To select a preset workout, press the Weight Loss button, the Aerobic button, the Performance but- ton, or the Endurance button repeatedly.

When a preset workout is selected, the displays will show the maximum incline setting, the dura- tion, and the maximum speed setting of the

workout. In addition, a profile of the speed settings of the workout will scroll across the matrix.

3.Start the workout.

Press the Start button, one of the speed increase buttons, or one of the numbered speed buttons to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking.

Each workout is divided into one-minute segments. One speed setting and one incline setting are pro- grammed for each segment. Note: The same speed and/or incline setting may be programmed for consecutive segments.

During the workout, the profile will show your progress. The flashing segment of the profile represents the current segment of the workout.

The height of the flashing segment indicates the speed setting for the current segment. At the end

of each segment, a series of tones will sound and the next segment of the profile will begin to flash. If a new speed and/or incline setting is programmed for the next segment, the new speed and/or incline setting will appear in the displays for a few sec- onds and the treadmill will automatically adjust to the new speed and/or incline setting.

If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the speed or in- cline buttons; however, when the next segment of the workout begins, the treadmill will auto- matically adjust to the speed and incline set- tings for the next segment.

To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or one of the Speed increase buttons. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.

The workout will continue in this way until the last segment of the workout ends. The walking belt will then slow to a stop.

4.Follow your progress with the displays. See step 5 on page 16.

5.Measure your heart rate if desired. See step 6 on page 16.

6.Turn on the fans if desired. See step 7 on page 16.

7.When you are finished exercising, remove the key from the console.

See step 8 on page 16.