JVC CA-MXJ200, CA-MXJ300 Connecting Speakers, Release the finger from the clamp, AM MW/LW antenna

Page 14

English

AM (MW/LW) antenna

1 2 3

Vinyl-covered wire (not supplied)

ANTENNA

	FM 75
	COAXIAL
AM
EXT	GND
	GND
	AM LOOP

AM (MW/LW) loop antenna (supplied)

1Connect the AM (MW/LW) loop antenna to the AM LOOP terminals as illustrated.

2Turn the AM (MW/LW) loop antenna until you have the best reception.

To connect an outdoor AM (MW/LW) antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM (MW/LW) loop antenna must remain connected.)

For better reception of both FM and AM (MW/LW)

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Connecting Speakers

You can connect a pair of the front speakers.

1	2	3
	Red
	CAUTION:
	SPEAKER IMPEDANCE
	6~16 OHMS.
	SPEAKERS
Speaker	RIGHT	Speaker
	RIGHT	LEFT
		cord
cord		cord
cord
	Black
Right		Left
speaker		speaker

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into the

terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

3Release the finger from the clamp.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

– 9 –

Image 14

Contents CA-MXJ300 CA-MXJ200 If in Doubt Consult a Competent Electrician English Deutsch Français CA-MXJ300 CA-MXJ200 Class Laser Product About This Manual PrecautionsIntroduction Contents Location of the Buttons and Controls CA-MXJ300Display Window Powered Rolling PanelCA-MXJ300 Front Panel CA-MXJ200 CA-MXJ200 Front Panel These buttons do not function as 1 / ÁRemote Control Remote ControlUnpacking Connecting AntennasGetting Started FM antennaAM MW/LW antenna Connecting SpeakersRelease the finger from the clamp To connect an outdoor AM MW/LW antennaTo connect audio equipment Connecting Other EquipmentPress and hold Demo for more than Seconds.DEMO To start the display demonstration manuallySetting the Clock Common OperationsTurning On the Power and Selecting the Sources Adjusting the VolumeTo select the sound modes, press Sound Reinforcing the Bass SoundSelecting the Sound Modes Surround modesPresetting Stations Tuning in a StationTuning in a Preset Station Listening to FM and AM MW/LW BroadcastsPlaying Back the Entire Discs Continuous Play Playing Back CDsLoading CDs Basic CD OperationsProgramming the Playing Order of the Tracks Program Play Playing at Random Random Play Select the Random play mode On the unitTo check the program contents Prepare CDsIf you try to eject CDs Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Tray Lock Playing Back Tapes Playing Back a TapePress Eject 0for the deck B RecordingRecording Tapes on Deck B Start recording On the unitCD Direct Recording To record on both sides Reverse ModeDubbing Tapes Press DubbingUsing the Timers Using Daily TimerPress 4or ¢to set the volume level When selecting CDWhen selecting Tuner FM or Tuner AM Press TimerTimer setting Using Recording TimerTo set the volume level REC appears on the displayPut a recordable cassette into deck B Press Shift To turn on On the remote controlPress Timer until REC appears On the displayTimer Priority Using Sleep TimerCassette decks MaintenanceHandling discs Troubleshooting EN, GE, FR, NL, SP, IT 0400KSMMDWHIT SP-MXJ300, SP-MXJ200 Connection Anschluss Aansluitingen Collegamento Tilslutning POD£¡CZENIE Zapojení