English
6 When selecting “– CD – – –”
1)Press 4or ¢ to select the disc number, then press SET.
2)Press 4or ¢ to set the track number, then press SET.
The unit enters volume setting mode.
When selecting “TUNER FM” or “TUNER AM”
Press 4 or ¢ to select the preset station number, then press SET.
The unit enters volume setting mode.
7 Press 4or ¢to set the volume level.
•You can select the volume level from among four levels. If you select “ VOL – –
–PRESET +
SET
– PRESET +
On the remote control:
1 | Press SHIFT. | SHIFT |
| ||
2 | Press TIMER. | TIMER |
|
| |
|
| 2 |
DAILY
The DAILY indicator also starts flashing on the display.
•Each time you press the button, the timer setting mode changes as follows:
DAILY = ON TIME = REC = ON TIME =
Clock setting (See page 11.) = Canceled
3 Press TIMER again. | TIMER |
“ON TIME” appears for 2 seconds, then the | 2 |
unit enters |
|
DAILY
8 Press SET to complete the Daily | SET |
Timer setting. The DAILY indicator stops flashing and remains
lit. The settings you have done are shown on the display in sequence.
DAILY
9 Press 
(standby/on) to turn off the unit (on standby) if you have set the Daily Timer with the unit turned on.
STANDBY
DAILY
4 Set the on-time you want the unit
To turn on or off Daily Timer after its setting is done
to turn on. |
| – SELECT + | |
4 | 5 | ||
1) Press SELECT – or SELECT + to set | |||
|
|
1Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.
2To turn off the Daily Timer, press
CANCEL.
The DAILY indicator goes off and “OFF” appears on the display.
The Daily Timer is canceled, but the setting for the Daily Timer remains in memory.
To turn on the Daily Timer, press SET.
The DAILY indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.
CLOCK/TIMER
DEMO
CANCEL
SET
the hour, then press SET.
2)Press SELECT – or SELECT + to set
the minute, then press SET. |
|
“OFF TIME” appears for 2 seconds, then | SET |
the unit enters | 8 |
5 Set the off-time you want the unit to
turn off (on standby). |
| – SELECT + | |
1) Press SELECT – or SELECT + to set |
| ||
4 | 5 | ||
|
the hour, then press SET.
2)Press SELECT – or SELECT + to set the minute, then press SET.
The unit enters source selecting mode.
SET
If the unit is turned on when the
Daily Timer does not work.
8 
– 23 –