JVC CA-MXJ300 manual Connecting Other Equipment, Press and hold Demo for more than Seconds.DEMO

Page 15

Connecting Other Equipment

You can connect an audio equipment — used only as a playback device.

When you connect and use this equipment, refer also to its manual.

Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

• DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

ANTENNA
	FM 75
	COAXIAL
AM
EXT	GND
AM LOOP
AUX
IN
RIGHT	LEFT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
SPEAKERS
RIGHT	LEFT
	Audio equipment
To audio output

Connect the audio output jacks on the other equipment and the AUX IN jacks on the rear, using an audio cord (not supplied).

English

NOW, you can plug in the unit and other connected equipment FINALLY!

	ANTENNA
	FM 75
	COAXIAL
AM
EXT	GND
	AM LOOP

AUX

IN

RIGHTLEFT

CAUTION:

SPEAKER IMPEDANCE 6~16 OHMS

SPEAKERS
RIGHT	LEFT

To a wall outlet

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

To stop the display demonstration, press any button on the

unit or the remote control.

To start the display demonstration manually

Press and hold DEMO for more than 2

seconds.DEMO

CANCEL

To stop the demonstration, press any button.

– 10 –

Image 15

Contents CA-MXJ300 CA-MXJ200 If in Doubt Consult a Competent Electrician English Deutsch Français CA-MXJ300 CA-MXJ200 Class Laser Product Precautions IntroductionAbout This Manual Contents CA-MXJ300 Location of the Buttons and ControlsPowered Rolling Panel CA-MXJ300 Front PanelDisplay Window CA-MXJ200 These buttons do not function as 1 / Á CA-MXJ200 Front PanelRemote Control Remote ControlFM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM MW/LW antenna Connecting SpeakersRelease the finger from the clamp AM MW/LW antennaTo start the display demonstration manually Connecting Other EquipmentPress and hold Demo for more than Seconds.DEMO To connect audio equipmentCommon Operations Setting the ClockAdjusting the Volume Turning On the Power and Selecting the SourcesSurround modes Reinforcing the Bass SoundSelecting the Sound Modes To select the sound modes, press SoundListening to FM and AM MW/LW Broadcasts Tuning in a StationTuning in a Preset Station Presetting StationsBasic CD Operations Playing Back CDsLoading CDs Playing Back the Entire Discs Continuous PlayProgramming the Playing Order of the Tracks Program Play Prepare CDs Select the Random play mode On the unitTo check the program contents Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Tray LockIf you try to eject CDs Playing Back a Tape Playing Back TapesStart recording On the unit RecordingRecording Tapes on Deck B Press Eject 0for the deck BPress Dubbing To record on both sides Reverse ModeDubbing Tapes CD Direct RecordingUsing Daily Timer Using the TimersPress Timer When selecting CDWhen selecting Tuner FM or Tuner AM Press 4or ¢to set the volume levelREC appears on the display Using Recording TimerTo set the volume level Timer settingOn the display To turn on On the remote controlPress Timer until REC appears Put a recordable cassette into deck B Press ShiftUsing Sleep Timer Timer PriorityMaintenance Handling discsCassette decks Troubleshooting EN, GE, FR, NL, SP, IT 0400KSMMDWHIT SP-MXJ300, SP-MXJ200 Connection Anschluss Aansluitingen Collegamento Tilslutning POD£¡CZENIE Zapojení