JVC CA-MXJ300, CA-MXJ200 manual Using the Timers, Using Daily Timer

Using the Timers Continued

English

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See page 11.)

3	– PRESET +
	Set the on-time you want the unit
	to turn on.

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4or ¢to set the minute, then press SET.

Using Daily Timer

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

SET

With Daily Timer, you can wake to your favorite music or radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the

on-time comes (the indicator flashes just before the on- time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” flashes just before the off-time), the unit automatically turns off (stands by).

4 Set the off-time you want the unit to turn off (on standby).

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

The unit enters source selecting mode.

–PRESET +

SET

The timer setting remains in memory until you change it.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1

5 Press 4or ¢to select the source to play, then press SET.

• Each time you press 4 or ¢, the source changes as

again.

• If you have made a mistake while setting timer, press

CANCEL. (However, this does not always work. If

CANCEL does not work, press CLOCK/TIMER repeatedly

and start from step 1 again.)

On the unit:
1 Press CLOCK/TIMER until	CLOCK/TIMER
“DAILY” appears on the display.

follows:

TUNER FM TUNER AM

AUX TAPE – CD – – –

DAILY

–PRESET +

SET

DAILY

The DAILY indicator also starts flashing on the display.

•Each time you press the button, the timer setting mode changes as follows:

DAILY ON TIME REC

Canceled	Clock	ON TIME
	setting

(See page 11.)

2 Press CLOCK/TIMER again.	CLOCK/TIMER
“ON TIME” appears for 2 seconds, then the

unit enters on-time setting mode.

TUNER FM: tunes into a specified preset FM station. = go to step 6.

TUNER AM: tunes into a specified preset AM (MW/LW) station. =go to step 6.

–CD – – –: plays a disc from a specified track of a specified disc. = go to step 6.

•Make sure there is a CD on the selected disc number tray.

TAPE: plays a tape in deck A or B. =go to step 7.

•Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•Make sure that the tape direction is correct. AUX: plays an external source.= go to step 7.

•To use this setting, the external component has to be equipped with the timer function.

DAILY

DAILY

– 22 –