Gold's Gym GGSY69530 manual Cable Trap is turned to hold the Cable Place

51. Remove the M10 Nylon Locknut (75) used in step	51
47.
Wrap the Long Cable (62) over a 90mm Pulley		75	38	76
(38). Attach the Pulley and a Cable Trap (37) to
			3
the Right Seat Frame (3) with the M10 x 119mm		37
Bolt (76) used in step 47 and the M10 Nylon		62
Locknut (75). Make sure that the Cable Trap is
turned to hold the Cable in place.
52. Remove the M10 Nylon Locknut (75) used in step	52
46.
Wrap the Long Cable (62) over a 90mm Pulley
(38). Attach the Pulley and a Cable Trap (37) to		75	62
the Press Frame (14) with the M10 x 119mm Bolt
(76) used in step 46, and the M10 Nylon Locknut
(75). Make sure that the Cable Trap is turned		37	38
to hold the Cable in place.
			14	76
53. Remove the M10 Nylon Locknut (75) used in step	53	75	62
45.
Wrap the Long Cable (62) under a 90mm Pulley		37	74
(38). Attach the Pulley and a Cable Trap (37) to
		38
the Right Upright (5) with the M10 x 110mm Bolt
(88) used in step 45, an M10 Washer (74), and
the M10 Nylon Locknut (75). Make sure that the
Cable Trap is turned to hold the Cable in
place.				88
				5
54. Wrap the Long Cable (62) over a 90mm Pulley	54
(38). Attach the Pulley and a Cable Trap (37) to
the second set of holes from the bottom of the				75
Double “U”-bracket (41) with an M10 x 48mm Bolt			23
(23) and an M10 Nylon Locknut (75). Make sure
				41
the Cable Trap is turned to hold the Cable in
			38
the groove of the Pulley.
				62
			37
55. Wrap the Long Cable (62) under a 90mm Pulley	55	75
(78). Attach the Pulley and a Cable Trap (37) to
the Right Base (1) with an M10 x 48mm Bolt (23)
and an M10 Nylon Locknut (75). Make sure that
the Cable Trap is turned to hold the Cable in
place.				62
			1	23
				38
				37
	20