Gold's Gym GGSY69530 manual Frame Assembly, Tighten the Locknuts yet

	Frame Assembly	1	42		42
1.	Before beginning assembly, make sure you
			42
	understand the information in the box on
	page 5.
			1
	Locate and open the parts bags labeled				84
	“FRAME ASSEMBLY 1” and “FRAME ASSEM-			83
	BLY 2.”
	Press four 40mm x 60mm Inner Caps (42) into				1
	the Right Base (1).
	Insert four M10 x 53mm Carriage Bolts (83) and			42
	an M10 x 78mm Carriage Bolt (84) up through
	the Right Base (1). Note: It may be helpful to
	place tape over the heads of the Carriage				83
	Bolts to hold them in place.
2.	Press five 40mm x 60mm Inner Caps (42) into	2	42
	the Left Base (2).
	Insert four M10 x 53mm Carriage Bolts (83) up
	through the Left Base (2). Note: It may be help-				42
	ful to place tape over the heads of the
	Carriage Bolts to hold them in place.				2
				83
			2	42
			83
			42
3. Attach the Right Base (1) to the Left Base (2) with		3
	four M10 x 78mm Bolts (85), four M10 Washers
	(74), and four M10 Nylon Locknuts (75). Do not			74	85
	tighten the Locknuts yet.
					74	85
						74	85
			1				2
			75	75
		6