Precor EFX manual Lower board cable

Connect the heart rate cable to the 4-prong receptacle on the electronics board.

Connect the RJ45 cable to its receptacle on the back of the display console. An audible click is heard when the cable is properly attached. Place excess cable inside the console bracket.

Important: When connecting the RJ45 cable to the back of the display, look for the receptacle that is in the same orientation as shown in the illustration below. Text embossed on the plastic states LOWER BOARD CONNECTION.

Lower board cable

Secure the display console with four buttonhead screws (L).

Wrench tighten.

Wrench tighten the hex head screws. Start at the base of the stabilizers and tighten all eight screws using a ½-inch socket with an extension. Return to the console bracket. Wrench tighten the four side screws, and then the two bottom screws.

Heart rate cable

536i Elliptical Fitness CrossTrainer Assembly Guide 10