Treadmill: Selecting Safety Code Protection
When the equipment is shipped from the factory, the safety code protection feature is disabled. If you enable the safety code, your patrons will need to enter four number keys in sequence to begin their exercise session and, on the treadmill, start the running belt. If the correct keys are not pressed within two minutes, further access is denied. For more information, refer to Entering the Safety Code.
1.At the S A F E T Y C O D E prompt, press OK. Use the navigational arrow keys to alternate between the two selections.
Setting | Description |
|
|
E N A B L E D | Causes the safety code prompt to appear prior to a |
| workout and when returning from pause mode. |
|
|
D I S A B L E D | Does not require a safety code to operate. |
|
|
CAUTION: Do not assume the equipment is safe because of safety code protection. Never leave children unsupervised around the equipment.
2.When you are ready, press OK to accept the displayed setting and move to the next feature. For further options, refer to the table in Changing the Product Settings.
Product Owner's Manual: Club Features
Choosing a Language
The equipment can display user prompts, text, and user entries in several different languages. When the equipment is shipped from the factory, the default language is English.
Note: Programming prompts are not affected by language selection. The prompts in this section continue to appear in English.
To choose a language:
1.At the S E L E C T L A N G U A G E prompt, press OK. Use the navigational arrow keys to choose a language.
2.Press OK again to accept the displayed setting and move to the next feature.
21