Precor S3-19 manual Assemble Leg Extension

Page 11

S3.19 Assembly and Maintenance Guide

2. Assemble Leg Extension

A.Cut wire ties.

B.Attach the Leg Extension to the Main Base using two 2½-inch bolts

two spring washers

Wrench tighten using a ⁹⁄₁₆ box-end wrench.

	2 - 2½” bolts	B
	2 - spring washers	B
			Main Base
		Leg
		Extension
1	2	3	4	5	6

Step 2. Assemble Leg Extension

page 11

Image 11

Contents S3.19 Page Personal Safety During Assembly Important Safety InstructionsTable of Contents Unpacking the Equipment Before You BeginRequired Tools PreparationsAssembly Instructions AssemblyInstructionsOpen the Box Assemble Main Structure Top Beam Assemble Leg Extension Install Rollers and Seat Pads Incline Back Bracket Pad Seat Pad Assemble Weight Stack Guide Rod Upper Frame ¾ buttonhead Crosspiece Top Cap Bolts Assemble Press Arm Press Arm Assembly Install Hi/Lo Pulley Assembly Install Lat Pulley Cable Feed the cable over the lower 3½-inch pulley Install Leg Extension Cable Install Leg Press Option Cable Connection Install Mid Pulley Cable and Hi/Lo Pulley Connection Mid Pulley Bracket Single Floating Pivoting Pulley Bracket Bolt Washers J Locknut Two metal Upper Shrouds and two acrylic Shrouds Install ShroudsAttach Accessories Move the Hi/Lo Pulley Apply Weight Decals and Lubricant Cable Adjustments and Maintenance Cable Tension Bottom Weight Plate Cable AdjustmentsImportant Do not remove the socket head bolt Selector Stem AdjustmentsGuide Rods MaintenanceLimited Warranty Precor Residential Equipment Limited WarrantyThank You and Welcome to Precor Tell US about Your NEW Precor Product Page S3.19 Specifications