S3.19 Assembly and Maintenance Guide
E.Disassemble the Single Floating Pulley attached to the Leg Press Option Cable 130211 and feed the Mid Pulley Cable around the disassembled pulley. Reattach the pulley to the floating pulley housing using
one
one thin zinc locknut Wrench tighten.
F.Disassemble the lower portion of the Double Floating Pulley. Feed the cable around the lower pulley and reattach it using
one
one zinc locknut Wrench tighten.
G.Feed the threaded end of the cable underneath the pulley inside the Pivoting Bracket attached to the Main Base.
H.Align the Pivoting Bracket with the base frame bracket on the Hi/Lo Pulley Assembly.
|
|
|
| Double Floating Pulley | |
|
|
|
| Assembly |
|
|
|
|
| 1 - 2" zinc bolt | F |
|
|
|
| 2 - zinc washers | |
|
|
|
| 1 - zinc locknut |
|
| Single Floating | G |
| Pivoting |
|
| Pulley |
| H Bracket |
| |
| 1 - 2" zinc bolt | E |
|
|
|
| 2 - zinc washers |
|
|
| |
| 1 - zinc locknut |
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Step 10. Install Mid Pulley Cable and Hi/Lo Pulley Connection, continued
page 25