Precor S3-19 manual Mid Pulley Bracket

C.For proper cable operation, the 3½-inch pulley, located on the Mid-pulley Bracket, must be on the same side as the Hi/Lo Pulley Assembly. If the pulley is not on the correct side, reassemble it.

D.Feed the threaded end of the cable over the top of the Mid-pulley Bracket’s 3½-inch pulley. Rest the cable on the floor.

Important: Stand between the S3.19 and the Hi/Lo Pulley Assembly and review the cable alignment. The Mid Pulley Cable must fall behind the Mid- pulley Bracket before wrapping around the Leg Extension Floating Pulley. Refer to the illustration.

Mid-

Pulley

Bracket

C

D

Note the location of the Hi/Lo Pulley Assembly.The 3½-inch pulley, located on the Mid-pulley Bracket, must be on the same side as the Hi/Lo Pulley Assembly. Reassemble the pulley, if necessary.

1

2

3

4

5

6

Step 10. Install Mid Pulley Cable and Hi/Lo Pulley Connection, continued

page 24