Precor S3-19 manual Assemble Main Structure

S3.19 Assembly and Maintenance Guide

1. Assemble Main Structure

A.Attach the Main Base to the Rear Crossbar using two 4¾-inch hex head bolts

four flat washers two locknuts

B.Install the Rear Upright to the Main Base using two 4¾-inch hex head bolts

four flat washers two locknuts

Note: Position the uprights so the Shroud mounts face the center of the unit.

C.Attach the Main Upright to the Main Base using

two 2¼-inch hex head bolts four flat washers

two locknuts

2 - 4¾" bolts
A 4 - washers
2 - locknuts		Rear Crossbar
Main Base
		Main Upright
			Shroud
			Mounts		Rear Upright
2 - 2¼" bolts	C				2 - 4¾" bolts
4 - washers					B 4 - washers
2 - locknuts					2 - locknuts
			Main Base
1	2	3	4	5	6

Step 1. Assemble Main Structure

page 9