S3.19 Assembly and Maintenance Guide
10.Install Mid Pulley Cable and Hi/Lo Pulley Connection
A.Disassemble the center pulley on the Main Upright and feed the threaded end of Mid Pulley Cable 130209 through the opening and over the
two shoulder spacers one locknut Wrench tighten.
B.Disassemble the Single Floating Pulley attached to the Leg Extension Cable 130210. Feed the Mid Pulley Cable around the pulley and reattach the pulley to its housing using
one
one thin zinc locknut Wrench tighten.
| 1 - 4" bolt | A |
|
|
|
| 2 - shoulder spacers |
|
|
| |
| 1 - locknut |
|
|
|
|
|
|
|
|
| Mid Pulley Cable |
|
|
|
|
| 130209 |
|
| Mid |
|
|
|
Single Floating |
| Pulley |
|
|
|
B | Bracket |
|
|
| |
Pulley |
|
|
|
| |
1 - 2" zinc bolt |
|
|
|
|
|
2 - zinc washers |
|
|
|
|
|
1 - zinc locknut |
|
|
|
|
|
| Leg Extension Cable 130210 |
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 |
Step 10. Install Mid Pulley Cable and Hi/Lo Pulley Connection
page 23