![](/images/new-backgrounds/1320375/32037529x1.webp)
S3.19 Assembly and Maintenance Guide
D.Orient the hole in the Top Cap Weight with the curve in the weight plates. Place the Top Cap Weight onto the Guide Rods and slide the Selector Stem into the weight stack.
E.Slide the Guide Rod Bracket onto the Guide Rods and secure it to the Upper Frame Crosspiece using two
two flat washers Wrench tighten.
D |
|
|
|
|
|
| Guide |
|
|
|
|
| Rod |
|
|
|
|
|
|
|
|
| Upper Frame |
|
|
| 2 - ¾" buttonhead |
| Crosspiece |
|
| E |
|
| |
| Top Cap | bolts |
| Guide Rod Bracket | |
| Weight |
| 2 - washers |
|
|
|
|
|
|
| |
| Selector |
|
|
|
|
| Stem |
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Step 4. Assemble Weight Stack, continued
page 15