![](/images/new-backgrounds/1320375/32037561x1.webp)
S3.19 Assembly and Maintenance Guide
4Cableand MaintenanceAdjustments
When the S3.19 is completely assembled, you need to check the cables for proper tension. Obvious signs that cable problems exist include:
✔Top Cap Weight does not rest squarely on the top weight of the Weight Stack.
✔Cables rub the inside edges of the pulleys.
✔Excess slack exists in the cables.
✔Weight Pin cannot be easily inserted in or removed from each hole in the Weight Stack.
✔Selector Stem rubs inside the Weight Stack.
CAUTION: Take the time to perform the following steps. If the cables do not have the proper tension you could void the Precor Limited Warranty.
Important: To access the cables attached to the Selector Stem and two Floating Pulleys, you will need to remove the shrouds.
1 | 2 | 3 | 4 | 5 | 6 |
Cable Adjustments and Maintenance
page 31