Precor S3-19 manual Press Arm Assembly

Page 17

S3.19 Assembly and Maintenance Guide

B.Slide the Handlebars in place on the Press Arm. Handlebars curve inward. Review the illustration for correct handlebar placement. Pull the T-handle up and adjust the handlebars into a secure position.

C.Attach the Row Handles using eight ¼ x ½-inch buttonhead screws eight radius washers

Note: Make sure the radius washers lie flat against the Row Handle before wrench tightening.

D.Wrench tighten the screws using the 5mm hex keys.

		Press Arm Assembly
B
Handlebars
				8	- ¼ x ½" buttonhead screws
				C 8	- radius washers
			Row Handles
1	2	3	4	5	6

Step 5. Assemble Press Arm, continued

page 17

Image 17

Contents

S3.19 Page Personal Safety During Assembly Important Safety InstructionsTable of Contents Unpacking the Equipment Before You BeginRequired Tools PreparationsAssembly Instructions AssemblyInstructionsOpen the Box Assemble Main Structure Top Beam Assemble Leg Extension Install Rollers and Seat Pads Incline Back Bracket Pad Seat Pad Assemble Weight Stack Guide Rod Upper Frame ¾ buttonhead Crosspiece Top Cap Bolts Assemble Press Arm Press Arm Assembly Install Hi/Lo Pulley Assembly Install Lat Pulley Cable Feed the cable over the lower 3½-inch pulley Install Leg Extension Cable Install Leg Press Option Cable Connection Install Mid Pulley Cable and Hi/Lo Pulley Connection Mid Pulley Bracket Single Floating Pivoting Pulley Bracket Bolt Washers J Locknut Two metal Upper Shrouds and two acrylic Shrouds Install ShroudsAttach Accessories Move the Hi/Lo Pulley Apply Weight Decals and Lubricant Cable Adjustments and Maintenance Cable Tension Bottom Weight Plate Cable AdjustmentsImportant Do not remove the socket head bolt Selector Stem AdjustmentsGuide Rods MaintenanceLimited Warranty Precor Residential Equipment Limited WarrantyThank You and Welcome to Precor Tell US about Your NEW Precor Product Page S3.19 Specifications