JVC RX-D411S manual Audio/video connection, Component S-video Composite, To component video output

Page 15

7 Audio/video connection

In addition to the HDMI terminals and SCART terminals, this receiver is equipped with three video terminals—composite video, S-video, and component video terminals, and two audio jacks—analog discrete 5.1 channel audio input jacks (DVD MULTI IN) and stereo audio jacks.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S-video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order:

Component > S-video > Composite

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

IMPORTANT:

The video signals from one type of these input jacks are transmitted only through the video output jacks of the same type. Therefore, if a recording video component and a playing video component are connected to the receiver through the video terminals of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video terminals of different type, you cannot view the playback picture on the TV.*

*When connecting the TV to the receiver through the HDMI MONITOR OUT terminal and selecting “HDMI” for the video output setting, you can view the playback picture on the TV.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

Do not connect the AC power cord until all other connections have been made.

Connecting a DVD recorder or DVD player with its stereo output jacks:

Turn off all components before making connections.

• When you connect the components, refer also to their manuals.

Green

: signal flow

 

Blue

 

Red

Component video cable (not supplied)

 

DVD recorder or DVD player

 

White

 

Red

 

Stereo audio cable (not supplied)

NOTES

Å To component video output

 

• Select the audio and video input setting according to the

• Connect Y, PB, and PR correctly.

connection method. See page 21 for details.

ı To left/right audio channel output

 

•You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the digital coaxial terminal— DIGITAL IN 1(DVR/DVD) on the rear of the receiver is set for a DVD recorder and DVD player. For details of digital audio connection, see page 14.

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Precautions FeaturesTable of Contents Remote control When operating a DVD player, set the mode selector i to DVDParts identification TA, NEWS, Info Display windowFront Panel DVR/DVD, VCR, VIDEO, TV, USB, FM, AMCENTER, SUBWOOFER, SURR-L, SURR-R Rear PanelVideovcr IN, DVR/DVD IN, Monitor OUT Video IN, DVR/DVDBefore installation Putting the batteries in the remote controlGetting started Connecting the FM and AM MW antennas AM MW antenna connectionFM antenna connection Turn the knob clockwise Connecting the speakersConnecting the speakers Close the terminalTurn off all components before making connections Connecting video componentsConverting video signals into Hdmi signals Hdmi connectionFor T-V Link Scart Terminal SpecificationsScart connection For an analog decoderTo left/right audio channel output Audio/video connectionComponent S-video Composite To component video outputWhen you enjoy the sound recorded in DVD-Audio With analog methodWith digital method Composite video cable not supplied Video cable not supplied Connecting a VCR and another video componentConnecting a TV DBS tuner, etc White RedDigital input terminals Connecting the power cordDigital audio connection Digital output terminalTurn on your PC How to install the USB driversCheck if the drivers are correctly installed USB connectionBefore starting Precise Surround Setup Operating procedureVolume of test tones is not adjustable = SW Subwoofer PSS indicatorIf Precise Surround Setup is not completed properly Put on the microphonesPress Test again to stop the test tone From the remote control onlyTurning the frequency optimizing function off Unplug the earphone-type microphonesPossible cause Solution Troubleshooting for Precise Surround Setup2Select the source to play 1Turn on the power3Adjust the volume Basic operationsSelecting the audio input setting Selecting the video and audio input settingsListening with headphones Selecting the video input settingLinear PCM From the remote control only Press Dimmer repeatedlyTo restore the sound, press Muting again Changing the display brightnessMaking sounds natural Turning off the power with the Sleep TimerBasic adjustment of auto memory From the remote control only Press Sleep repeatedlyTuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsTo tune in a preset station Selecting the FM reception modeAbout characters shown on the display Press Display while listening to an FM stationPress PTY Search while listening to an FM station On the displayDescription of the PTY codes PTY codesTest News News Switching to broadcast program of your choice temporarilyBasic setting items Basic settingsBack OUT Operating procedureSetting the speakers SubwooferOFF Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance AutoSW LFE Setting bass soundSetting the crossover frequency-CROSSOVER MainUsing the Midnight mode Setting the Audio delay levelLFE ATT Manual Setting the auto function modeHdmi Video Hdmi VCRTurn Multi JOG to adjust the selected item Sound adjustmentsBasic adjustment items Press AdjustYou can adjust the speaker output levels Adjusting the speaker output levelsAdjust the speaker output levels From the remote controlATT Normal Adjusting the sound parameters for the Surround/DSP modesEffect ATT onDimension Center WidthCenter Align Introducing the Surround modes Dolby DigitalDolby Surround DTS 96/24 DTSDTS Digital Surround DTS Extended Surround DTS-ESMono Film About other digital signalsIntroducing the DSP modes Digital Acoustic Processor DAP modesUsing the Surround/DSP modes 3D Headphone modeDTS DTS-ES About the DSP modesAuto Surround Virtual Surround BackPress Surround From the remote control Select and play any sourceTurn Multi JOG to select the Surround DSP mode you want To cancel Surround/DSP modesOperating other JVC products VCRChannel + DVD recorder or DVD player Release DVR/DVDSET JVC Manufacturer codes for TV CodesCGM VCRIf more than one code is listed for your brand of VCR, try Manufacturer codes for VCR CodesMenu Try to operate your DVD player by Pressing DVR/DVDTroubleshooting Problem Possible Cause SolutionPower Remote control Tuner Set the mode selector to the properButton before operation Hdmi SpecificationsRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents