JVC RX-D411S manual Center Width, Dimension, Center Align

Page 42

7 Adjusting the panorama control for Pro Logic

IIx Music and Pro Logic II Music—PANORAMA

This setting is available when Pro Logic IIx Music or Pro Logic

IIMusic is activated for the analog or digital 2-channel sound signal.

To activate Pro Logic IIx Music or Pro Logic II Music, see pages 43 and 44.

• Once you have made an adjustment, it is memorized until you change the setting.

• You cannot adjust directly from the remote control.

PANORAMA ON Select to add “wraparound” sound effect with side-wall image.

PANORAMA OFF Select to listen to originally recorded sound.

Initial setting:

OFF

7 Adjusting the center channel localization for

Pro Logic IIx Music and Pro Logic II Music—

CENTER WIDTH

This setting is available when Pro Logic IIx Music or Pro Logic

IIMusic is activated for the analog or digital 2-channel sound signal.

To activate Pro Logic IIx Music or Pro Logic II Music, see pages 43 and 44.

• If “CENTER SPK” is set to “NO” (see page 30), this item is not adjustable.

• Once you have made an adjustment, it is memorized until you change the setting.

• You cannot adjust directly from the remote control.

Adjustable range: OFF and 1 to 7 (in 1 step intervals)

Initial setting:

3

As the number increases, the center channel sound moves toward the left and right speakers.

Normally, select “3.”

7 Adjusting the sound localization position for Pro Logic IIx Music and Pro Logic II Music

—DIMENSION

This setting is available when Pro Logic IIx Music or Pro Logic

IIMusic is activated for the analog or digital 2-channel sound signal.

To activate Pro Logic IIx Music or Pro Logic II Music, see pages 43 and 44.

• Once you have made an adjustment, it is memorized until you change the setting.

• You cannot adjust directly from the remote control.

Adjustable range: 1 to 7 (in 1 step intervals)

Initial setting:

4

As the number increases, the sound localization moves towards forward from backward.

Normally, select “4.”

7 Adjusting the sound localization of the center channel—CENTER GAIN

This setting is available only when Neo:6 Music is in use.

If “CENTER SPK” is set to “NO” (see page 30), this item is not adjustable.

Once you have made an adjustment, it is memorized until you change the setting.

You cannot adjust directly from the remote control.

Adjustable range: 0 to 1.0 (in 0.1 step intervals)

Initial setting:

0.3

As the number increases, the center channel will be localized clearly.

Normally, select “0.3.”

7 Adjusting the center tone—CENTER TONE

This setting is available when one of the Surround/DSP modes is in use. To activate Surround/DSP mode, see pages 43 and 44.

If “CENTER SPK” is set to “NO” (see page 30), this item is not adjustable.

This setting is common to all Surround modes, and is memorized separately for DSP modes.

You cannot adjust directly from the remote control.

Adjustable range: 1 to 5 (in 1 step intervals)

Initial setting:

3

As the number increases, the dialogue becomes stronger. Normally, select “3.”

When the center tone is set to other than “3,” the C.TONE indicator lights up on the display.

7 Aligning the vertical localization of the center channel for Surround/DSP modes—

CENTER ALIGN

This setting is available when one of the Surround/DSP modes (except Pro Logic IIx Music, Pro Logic II Music, Neo:6 Music, and All Channel Stereo) is in use. To activate Surround/DSP mode, see pages 43 and 44.

If “CENTER SPK” is set to “NO” (see page 30), this item is not adjustable.

Once you have made an adjustment, it is memorized for each Surround/DSP mode.

You cannot adjust directly from the remote control.

C ALIGN ON Select this when you cannot feel as if the actors or singers are speaking or singing on the screen.

C ALIGN OFF Center alignment is turned off.

Initial setting: OFF

38

Image 42
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Features PrecautionsTable of Contents Remote control When operating a DVD player, set the mode selector i to DVDParts identification DVR/DVD, VCR, VIDEO, TV, USB, FM, AM Display windowFront Panel TA, NEWS, InfoVideo IN, DVR/DVD Rear PanelVideovcr IN, DVR/DVD IN, Monitor OUT CENTER, SUBWOOFER, SURR-L, SURR-RBefore installation Putting the batteries in the remote controlGetting started Connecting the FM and AM MW antennas AM MW antenna connectionFM antenna connection Close the terminal Connecting the speakersConnecting the speakers Turn the knob clockwiseHdmi connection Connecting video componentsConverting video signals into Hdmi signals Turn off all components before making connectionsFor an analog decoder Scart Terminal SpecificationsScart connection For T-V LinkTo component video output Audio/video connectionComponent S-video Composite To left/right audio channel outputWhen you enjoy the sound recorded in DVD-Audio With analog methodWith digital method DBS tuner, etc White Red Connecting a VCR and another video componentConnecting a TV Composite video cable not supplied Video cable not suppliedDigital output terminal Connecting the power cordDigital audio connection Digital input terminalsUSB connection How to install the USB driversCheck if the drivers are correctly installed Turn on your PCBefore starting Precise Surround Setup Operating procedureVolume of test tones is not adjustable Put on the microphones PSS indicatorIf Precise Surround Setup is not completed properly = SW SubwooferUnplug the earphone-type microphones From the remote control onlyTurning the frequency optimizing function off Press Test again to stop the test toneTroubleshooting for Precise Surround Setup Possible cause SolutionBasic operations 1Turn on the power3Adjust the volume 2Select the source to playSelecting the video input setting Selecting the video and audio input settingsListening with headphones Selecting the audio input settingChanging the display brightness From the remote control only Press Dimmer repeatedlyTo restore the sound, press Muting again Linear PCMFrom the remote control only Press Sleep repeatedly Turning off the power with the Sleep TimerBasic adjustment of auto memory Making sounds naturalTo store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationOn the display Press Display while listening to an FM stationPress PTY Search while listening to an FM station About characters shown on the displayDescription of the PTY codes PTY codesTest Switching to broadcast program of your choice temporarily News NewsBasic settings Basic setting itemsSubwoofer Operating procedureSetting the speakers Back OUTAuto Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance OFFMain Setting bass soundSetting the crossover frequency-CROSSOVER SW LFEUsing the Midnight mode Setting the Audio delay levelLFE ATT Hdmi VCR Setting the auto function modeHdmi Video ManualPress Adjust Sound adjustmentsBasic adjustment items Turn Multi JOG to adjust the selected itemFrom the remote control Adjusting the speaker output levelsAdjust the speaker output levels You can adjust the speaker output levelsATT on Adjusting the sound parameters for the Surround/DSP modesEffect ATT NormalDimension Center WidthCenter Align Introducing the Surround modes Dolby DigitalDolby Surround DTS Extended Surround DTS-ES DTSDTS Digital Surround DTS 96/24Digital Acoustic Processor DAP modes About other digital signalsIntroducing the DSP modes Mono FilmUsing the Surround/DSP modes 3D Headphone modeDTS Virtual Surround Back About the DSP modesAuto Surround DTS-ESTo cancel Surround/DSP modes From the remote control Select and play any sourceTurn Multi JOG to select the Surround DSP mode you want Press SurroundOperating other JVC products VCRChannel + DVD recorder or DVD player Release DVR/DVDSET Manufacturer codes for TV Codes JVCManufacturer codes for VCR Codes VCRIf more than one code is listed for your brand of VCR, try CGMTry to operate your DVD player by Pressing DVR/DVD MenuTroubleshooting Problem Possible Cause SolutionPower Remote control Tuner Set the mode selector to the properButton before operation Specifications HdmiRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.