JVC RX-D411S manual From the remote control Select and play any source, Press Surround

Page 48

7 Selecting the Surround/DSP modes

From the remote control:

1

2

1Select and play any source.

•Surround/DSP modes are not available when multi- channel PCM (see page 41) signals recorded in DVD- Audio are coming in. See page 12 for details.

•Make sure you have selected the audio input setting (analog or digital) correctly (see page 21).

2Press SURROUND repeatedly to select

the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

AUTO SURROUND*1 = Surround modes*2 = HALL1

=HALL2 = LIVE CLUB = DANCE CLUB = PAVILION

=THEATRE1 = THEATRE2 = MONO FILM*3 =

ALL CH STEREO*4 = SURROUND OFF = (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 42.

*3 If an incoming signal is a multi-channel (more than 2 channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF” appears on the display.

On the front panel:

 

2

1, 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1Select and play any source.

•Surround/DSP modes are not available when multi- channel PCM (see page 41) signals recorded in DVD- Audio are coming. See page 12 for details.

•Make sure you have selected the audio input setting (analog or digital) correctly (see page 21).

2Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

3Turn MULTI JOG to select the Surround/

DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

AUTO SURROUND*1 Ô Surround modes*2 Ô HALL1

Ô HALL2 Ô LIVE CLUB Ô DANCE CLUB Ô PAVILION Ô THEATRE1 Ô THEATRE2 Ô MONO FILM*3 Ô ALL CH STEREO*4 Ô SURROUND OFF Ô (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 42.

*3 If an incoming signal is a multi-channel (more than 2 channels) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the display.

44

Page 47 Page 49
Image 48
Page 47 Page 49
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Features PrecautionsTable of Contents Remote control When operating a DVD player, set the mode selector i to DVDParts identification Display window Front PanelDVR/DVD, VCR, VIDEO, TV, USB, FM, AM TA, NEWS, InfoRear Panel Videovcr IN, DVR/DVD IN, Monitor OUTVideo IN, DVR/DVD CENTER, SUBWOOFER, SURR-L, SURR-RBefore installation Putting the batteries in the remote controlGetting started Connecting the FM and AM MW antennas AM MW antenna connectionFM antenna connection Connecting the speakers Connecting the speakersClose the terminal Turn the knob clockwiseConnecting video components Converting video signals into Hdmi signalsHdmi connection Turn off all components before making connectionsScart Terminal Specifications Scart connectionFor an analog decoder For T-V LinkAudio/video connection Component S-video CompositeTo component video output To left/right audio channel outputWhen you enjoy the sound recorded in DVD-Audio With analog methodWith digital method Connecting a VCR and another video component Connecting a TVDBS tuner, etc White Red Composite video cable not supplied Video cable not suppliedConnecting the power cord Digital audio connectionDigital output terminal Digital input terminalsHow to install the USB drivers Check if the drivers are correctly installedUSB connection Turn on your PCBefore starting Precise Surround Setup Operating procedureVolume of test tones is not adjustable PSS indicator If Precise Surround Setup is not completed properlyPut on the microphones = SW SubwooferFrom the remote control only Turning the frequency optimizing function offUnplug the earphone-type microphones Press Test again to stop the test toneTroubleshooting for Precise Surround Setup Possible cause Solution1Turn on the power 3Adjust the volumeBasic operations 2Select the source to playSelecting the video and audio input settings Listening with headphonesSelecting the video input setting Selecting the audio input settingFrom the remote control only Press Dimmer repeatedly To restore the sound, press Muting againChanging the display brightness Linear PCMTurning off the power with the Sleep Timer Basic adjustment of auto memoryFrom the remote control only Press Sleep repeatedly Making sounds naturalTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationPress Display while listening to an FM station Press PTY Search while listening to an FM stationOn the display About characters shown on the displayDescription of the PTY codes PTY codesTest Switching to broadcast program of your choice temporarily News NewsBasic settings Basic setting itemsOperating procedure Setting the speakersSubwoofer Back OUTActivating the EX/ES/PLIIx setting- EX/ES/PLIIx Setting the speaker distanceAuto OFFSetting bass sound Setting the crossover frequency-CROSSOVERMain SW LFEUsing the Midnight mode Setting the Audio delay levelLFE ATT Setting the auto function mode Hdmi VideoHdmi VCR ManualSound adjustments Basic adjustment itemsPress Adjust Turn Multi JOG to adjust the selected itemAdjusting the speaker output levels Adjust the speaker output levelsFrom the remote control You can adjust the speaker output levelsAdjusting the sound parameters for the Surround/DSP modes EffectATT on ATT NormalDimension Center WidthCenter Align Introducing the Surround modes Dolby DigitalDolby Surround DTS DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24About other digital signals Introducing the DSP modesDigital Acoustic Processor DAP modes Mono FilmUsing the Surround/DSP modes 3D Headphone modeDTS About the DSP modes Auto SurroundVirtual Surround Back DTS-ESFrom the remote control Select and play any source Turn Multi JOG to select the Surround DSP mode you wantTo cancel Surround/DSP modes Press SurroundOperating other JVC products VCRChannel + DVD recorder or DVD player Release DVR/DVDSET Manufacturer codes for TV Codes JVCVCR If more than one code is listed for your brand of VCR, tryManufacturer codes for VCR Codes CGMTry to operate your DVD player by Pressing DVR/DVD MenuTroubleshooting Problem Possible Cause SolutionPower Remote control Tuner Set the mode selector to the properButton before operation Specifications HdmiRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents