JVC RX-D411S manual Important for the U.K

Page 2

Warnings, Cautions, and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT:

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.

European representative of Victor Company of Japan Limited. Is:

JVC Technology Centre Europe GmbH P.O. Box 10 05 52

61145 Friedberg Germany

Caution–– STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus,

ensure that the plug is easily accessible. The STANDBY/ON button in any position does not disconnect the mains line.

When the unit is on standby, the STANDBY lamp lights red.

When the unit is turned on, the STANDBY lamp goes off. The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

CAUTION

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids such as vases, shall be placed on the apparatus.

G-1

Image 2
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Features PrecautionsTable of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector i to DVD DVR/DVD, VCR, VIDEO, TV, USB, FM, AM Display windowFront Panel TA, NEWS, InfoVideo IN, DVR/DVD Rear PanelVideovcr IN, DVR/DVD IN, Monitor OUT CENTER, SUBWOOFER, SURR-L, SURR-RGetting started Before installationPutting the batteries in the remote control FM antenna connection Connecting the FM and AM MW antennasAM MW antenna connection Close the terminal Connecting the speakersConnecting the speakers Turn the knob clockwiseHdmi connection Connecting video componentsConverting video signals into Hdmi signals Turn off all components before making connectionsFor an analog decoder Scart Terminal SpecificationsScart connection For T-V LinkTo component video output Audio/video connectionComponent S-video Composite To left/right audio channel outputWith digital method When you enjoy the sound recorded in DVD-AudioWith analog method DBS tuner, etc White Red Connecting a VCR and another video componentConnecting a TV Composite video cable not supplied Video cable not suppliedDigital output terminal Connecting the power cordDigital audio connection Digital input terminalsUSB connection How to install the USB driversCheck if the drivers are correctly installed Turn on your PCVolume of test tones is not adjustable Before starting Precise Surround SetupOperating procedure Put on the microphones PSS indicatorIf Precise Surround Setup is not completed properly = SW SubwooferUnplug the earphone-type microphones From the remote control onlyTurning the frequency optimizing function off Press Test again to stop the test toneTroubleshooting for Precise Surround Setup Possible cause SolutionBasic operations 1Turn on the power3Adjust the volume 2Select the source to playSelecting the video input setting Selecting the video and audio input settingsListening with headphones Selecting the audio input settingChanging the display brightness From the remote control only Press Dimmer repeatedlyTo restore the sound, press Muting again Linear PCMFrom the remote control only Press Sleep repeatedly Turning off the power with the Sleep TimerBasic adjustment of auto memory Making sounds naturalTo store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationOn the display Press Display while listening to an FM stationPress PTY Search while listening to an FM station About characters shown on the displayTest Description of the PTY codesPTY codes Switching to broadcast program of your choice temporarily News NewsBasic settings Basic setting itemsSubwoofer Operating procedureSetting the speakers Back OUTAuto Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance OFFMain Setting bass soundSetting the crossover frequency-CROSSOVER SW LFELFE ATT Using the Midnight modeSetting the Audio delay level Hdmi VCR Setting the auto function modeHdmi Video ManualPress Adjust Sound adjustmentsBasic adjustment items Turn Multi JOG to adjust the selected itemFrom the remote control Adjusting the speaker output levelsAdjust the speaker output levels You can adjust the speaker output levelsATT on Adjusting the sound parameters for the Surround/DSP modesEffect ATT NormalCenter Align DimensionCenter Width Dolby Surround Introducing the Surround modesDolby Digital DTS Extended Surround DTS-ES DTSDTS Digital Surround DTS 96/24Digital Acoustic Processor DAP modes About other digital signalsIntroducing the DSP modes Mono FilmDTS Using the Surround/DSP modes3D Headphone mode Virtual Surround Back About the DSP modesAuto Surround DTS-ESTo cancel Surround/DSP modes From the remote control Select and play any sourceTurn Multi JOG to select the Surround DSP mode you want Press SurroundChannel + Operating other JVC productsVCR SET DVD recorder or DVD playerRelease DVR/DVD Manufacturer codes for TV Codes JVCManufacturer codes for VCR Codes VCRIf more than one code is listed for your brand of VCR, try CGMTry to operate your DVD player by Pressing DVR/DVD MenuPower TroubleshootingProblem Possible Cause Solution Button before operation Remote control TunerSet the mode selector to the proper Specifications HdmiRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.