JVC RX-D411S manual Before starting Precise Surround Setup, Operating procedure

Page 20

Precise Surround Setup

By using Precise Surround Setup, you can optimize the speaker settings easily, quickly and systematically without troublesome adjustments.

To obtain the best possible sound effect from the Surround/ DSP modes, set up the speaker and subwoofer information after all the connections are completed.

Setting the speakers automatically

Precise Surround Setup detects the sound from the speakers to measure your listening environment with dedicated earphone-type microphones (supplied), and automatically adjusts the following in less than 1 minute:

•Speaker size*

•Speaker distance*

•Speaker output level*

•Crossover frequency*

•Frequency response

The receiver generates test tones from each speaker and picks them up with dedicated earphone-type microphones.

The microphones feedback the test tones to the receiver.

*You can also adjust the settings manually. (See pages 29 to 32.)

7 Before starting Precise Surround Setup

•Connect all of your speakers and subwoofer correctly and confirm their position.

•When subwoofer has a built-in volume and crossover frequency controls, adjust them as follows:

–Set the volume level to the medium.

–Set the crossover frequency to the highest level.

•Precise Surround Setup is not available in the following cases:

–While headphones are connected

–When selecting “A MULTI” for the audio input setting (see page 12)

–When multi-channel PCM signals (see page 41) are coming in with selecting “HDMI” for the audio input setting (see page 12)

•Do not block between the earphone-type microphones and speakers while the microphones are picking up test tones from the speakers.

•If the microphone cord is not long enough to make a connection between the receiver and your listening position, use a stereo extension cord (not supplied).

–You cannot get correct results with a monaural extension cord.

CAUTION:

Be sure that loud test tones will be generated from speakers during Precise Surround Setup.

• The volume of test tones is not adjustable.

7 Operating procedure

1Plug the dedicated earphone-type microphones into the PRECISE SURROUND SETUP MIC jack.

•Keep the connection until Precise Surround Setup is completed.

Dedicated earphone-type microphones (supplied)

2Press STANDBY/ON (or AUDIO on the remote control) to turn the power on.

•Set the volume level to the medium or lower turning the MASTER VOLUME control (see page 20).

STANDBY/ON button

MASTER VOLUME control

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Features PrecautionsTable of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector i to DVD Display window Front PanelDVR/DVD, VCR, VIDEO, TV, USB, FM, AM TA, NEWS, InfoRear Panel Videovcr IN, DVR/DVD IN, Monitor OUTVideo IN, DVR/DVD CENTER, SUBWOOFER, SURR-L, SURR-RGetting started Before installationPutting the batteries in the remote control FM antenna connection Connecting the FM and AM MW antennasAM MW antenna connection Connecting the speakers Connecting the speakersClose the terminal Turn the knob clockwiseConnecting video components Converting video signals into Hdmi signalsHdmi connection Turn off all components before making connectionsScart Terminal Specifications Scart connectionFor an analog decoder For T-V LinkAudio/video connection Component S-video CompositeTo component video output To left/right audio channel outputWith digital method When you enjoy the sound recorded in DVD-AudioWith analog method Connecting a VCR and another video component Connecting a TVDBS tuner, etc White Red Composite video cable not supplied Video cable not suppliedConnecting the power cord Digital audio connectionDigital output terminal Digital input terminalsHow to install the USB drivers Check if the drivers are correctly installedUSB connection Turn on your PCVolume of test tones is not adjustable Before starting Precise Surround SetupOperating procedure PSS indicator If Precise Surround Setup is not completed properlyPut on the microphones = SW SubwooferFrom the remote control only Turning the frequency optimizing function offUnplug the earphone-type microphones Press Test again to stop the test toneTroubleshooting for Precise Surround Setup Possible cause Solution1Turn on the power 3Adjust the volumeBasic operations 2Select the source to playSelecting the video and audio input settings Listening with headphonesSelecting the video input setting Selecting the audio input settingFrom the remote control only Press Dimmer repeatedly To restore the sound, press Muting againChanging the display brightness Linear PCMTurning off the power with the Sleep Timer Basic adjustment of auto memoryFrom the remote control only Press Sleep repeatedly Making sounds naturalTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationPress Display while listening to an FM station Press PTY Search while listening to an FM stationOn the display About characters shown on the displayTest Description of the PTY codesPTY codes Switching to broadcast program of your choice temporarily News NewsBasic settings Basic setting itemsOperating procedure Setting the speakersSubwoofer Back OUTActivating the EX/ES/PLIIx setting- EX/ES/PLIIx Setting the speaker distanceAuto OFFSetting bass sound Setting the crossover frequency-CROSSOVERMain SW LFELFE ATT Using the Midnight modeSetting the Audio delay level Setting the auto function mode Hdmi VideoHdmi VCR ManualSound adjustments Basic adjustment itemsPress Adjust Turn Multi JOG to adjust the selected itemAdjusting the speaker output levels Adjust the speaker output levelsFrom the remote control You can adjust the speaker output levelsAdjusting the sound parameters for the Surround/DSP modes EffectATT on ATT NormalCenter Align DimensionCenter Width Dolby Surround Introducing the Surround modesDolby Digital DTS DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24About other digital signals Introducing the DSP modesDigital Acoustic Processor DAP modes Mono FilmDTS Using the Surround/DSP modes3D Headphone mode About the DSP modes Auto SurroundVirtual Surround Back DTS-ESFrom the remote control Select and play any source Turn Multi JOG to select the Surround DSP mode you wantTo cancel Surround/DSP modes Press SurroundChannel + Operating other JVC productsVCR SET DVD recorder or DVD playerRelease DVR/DVD Manufacturer codes for TV Codes JVCVCR If more than one code is listed for your brand of VCR, tryManufacturer codes for VCR Codes CGMTry to operate your DVD player by Pressing DVR/DVD MenuPower TroubleshootingProblem Possible Cause Solution Button before operation Remote control TunerSet the mode selector to the proper Specifications HdmiRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents