JVC RX-D411S manual Using the Midnight mode, Setting the Audio delay level, Lfe Att

Page 37

7 Setting the low frequency effect attenuator

—LFE ATT

If the bass sound is distorted while playing back software encoded with Dolby Digital or DTS, set the LFE level to eliminate distortion.

• This function takes effect only when the LFE signals come in.

LFE 0dB

Normally select this.

LFE –10dB

Select when the bass sound is distorted.

 

 

Initial setting:

0 dB

Using the Midnight mode—

MIDNIGHT MODE

You can enjoy a powerful sound at night using the Midnight mode.

When the Midnight mode is activated, the MIDNIGHT indicator lights up on the display.

MIDNIGHT OFF

Select when you want to enjoy surround

 

with its full dynamic range. (No effect

 

applied.)

 

 

MIDNIGHT 1

Select when you want to reduce the

 

dynamic range a little.

 

 

MIDNIGHT 2

Select when you want to apply the

 

compression effect fully (useful at night).

 

 

Initial setting:

OFF

From the remote control:

Press MIDNIGHT repeatedly to select either one of the above.

MIDNIGHT

Setting the digital input (DIGITAL IN) terminals—DIGITAL IN 1/2/3

When you use the digital input terminals, register what components are connected to which terminals—DIGITAL IN 1/2/3 (see page 14) so that the correct source name will appear when you select the digital source.

•You cannot adjust directly from the remote control. Select one of the following components for each terminal:

DVR/DVD

For the DVD player (or DVD recorder)

VIDEO

For the component connected to the

 

VIDEO IN jacks on the rear of the receiver

 

 

VCR

For the VCR

 

 

TV

For the TV

 

 

Initial setting:

DVR/DVD (for “DIGITAL IN 1”)

 

VIDEO (for “DIGITAL IN 2”)

 

TV (for “DIGITAL IN 3”)

NOTES

•You cannot assign the same component for different terminals. The priority order for assignment is as follows:

“DIGITAL IN 1” > “DIGITAL IN 2” > “DIGITAL IN 3” Ex.: When “DIGITAL IN 1” is set to “DVR/DVD.”

DIGITAL IN 1

DVR/DVD

VIDEO

VCR

TV

 

 

 

 

 

‘

For “DIGITAL IN 2,” “VIDEO,” “VCR,” and “TV” are selectable.

• In this case, “VCR” is selected.

DIGITAL IN 2

DVR/DVD

VIDEO

VCR

TV

 

 

 

 

 

‘

For “DIGITAL IN 3,” “VIDEO” and “TV” are selectable.

DIGITAL IN 3

DVR/DVD

VIDEO

VCR

TV

 

 

 

 

 

 

 

 

 

 

: Selectable

 

 

: Not selectable

 

 

 

 

 

 

 

 

 

 

 

 

•Setting “DIGITAL IN 1” affects “DIGITAL IN 2” and “DIGITAL IN 3” settings. When you have changed “DIGITAL IN 1,” confirm the components assigned to “DIGITAL IN 2” and “DIGITAL IN 3.”

Setting the Audio delay level—

AUDIO DELAY

Synchronization between audio and video reproduction can be possibly disturbed because video signal decoding is time- consuming compared to the audio signal decoding.

On this setting, you can correct synchronization between video and audio signals by delaying the audio signal timing.

• You cannot adjust directly from the remote control.

Adjustable range: OFF and 10 ms to 150 ms (in 10 ms intervals)

Initial setting:

OFF

NOTE

The audio delay level setting does not take effect when selecting “A MULTI” for the audio input setting (see page 12).

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Precautions FeaturesTable of Contents When operating a DVD player, set the mode selector i to DVD Remote controlParts identification Front Panel Display windowDVR/DVD, VCR, VIDEO, TV, USB, FM, AM TA, NEWS, InfoVideovcr IN, DVR/DVD IN, Monitor OUT Rear PanelVideo IN, DVR/DVD CENTER, SUBWOOFER, SURR-L, SURR-RPutting the batteries in the remote control Before installationGetting started AM MW antenna connection Connecting the FM and AM MW antennasFM antenna connection Connecting the speakers Connecting the speakersClose the terminal Turn the knob clockwiseConverting video signals into Hdmi signals Connecting video componentsHdmi connection Turn off all components before making connectionsScart connection Scart Terminal SpecificationsFor an analog decoder For T-V LinkComponent S-video Composite Audio/video connectionTo component video output To left/right audio channel outputWith analog method When you enjoy the sound recorded in DVD-AudioWith digital method Connecting a TV Connecting a VCR and another video componentDBS tuner, etc White Red Composite video cable not supplied Video cable not suppliedDigital audio connection Connecting the power cordDigital output terminal Digital input terminalsCheck if the drivers are correctly installed How to install the USB driversUSB connection Turn on your PCOperating procedure Before starting Precise Surround SetupVolume of test tones is not adjustable If Precise Surround Setup is not completed properly PSS indicatorPut on the microphones = SW SubwooferTurning the frequency optimizing function off From the remote control onlyUnplug the earphone-type microphones Press Test again to stop the test tonePossible cause Solution Troubleshooting for Precise Surround Setup3Adjust the volume 1Turn on the powerBasic operations 2Select the source to playListening with headphones Selecting the video and audio input settingsSelecting the video input setting Selecting the audio input settingTo restore the sound, press Muting again From the remote control only Press Dimmer repeatedlyChanging the display brightness Linear PCMBasic adjustment of auto memory Turning off the power with the Sleep TimerFrom the remote control only Press Sleep repeatedly Making sounds naturalUsing preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modePress PTY Search while listening to an FM station Press Display while listening to an FM stationOn the display About characters shown on the displayPTY codes Description of the PTY codesTest News News Switching to broadcast program of your choice temporarilyBasic setting items Basic settingsSetting the speakers Operating procedureSubwoofer Back OUTSetting the speaker distance Activating the EX/ES/PLIIx setting- EX/ES/PLIIxAuto OFFSetting the crossover frequency-CROSSOVER Setting bass soundMain SW LFESetting the Audio delay level Using the Midnight modeLFE ATT Hdmi Video Setting the auto function modeHdmi VCR ManualBasic adjustment items Sound adjustmentsPress Adjust Turn Multi JOG to adjust the selected itemAdjust the speaker output levels Adjusting the speaker output levelsFrom the remote control You can adjust the speaker output levelsEffect Adjusting the sound parameters for the Surround/DSP modesATT on ATT NormalCenter Width DimensionCenter Align Dolby Digital Introducing the Surround modesDolby Surround DTS Digital Surround DTSDTS Extended Surround DTS-ES DTS 96/24Introducing the DSP modes About other digital signalsDigital Acoustic Processor DAP modes Mono Film3D Headphone mode Using the Surround/DSP modesDTS Auto Surround About the DSP modesVirtual Surround Back DTS-ESTurn Multi JOG to select the Surround DSP mode you want From the remote control Select and play any sourceTo cancel Surround/DSP modes Press SurroundVCR Operating other JVC productsChannel + Release DVR/DVD DVD recorder or DVD playerSET JVC Manufacturer codes for TV CodesIf more than one code is listed for your brand of VCR, try VCRManufacturer codes for VCR Codes CGMMenu Try to operate your DVD player by Pressing DVR/DVDProblem Possible Cause Solution TroubleshootingPower Set the mode selector to the proper Remote control TunerButton before operation Hdmi SpecificationsRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents