JVC RX-D411S manual Put on the microphones, = SW Subwoofer, PSS indicator, Pss

Page 21

3Put on the microphones.

•Insert the microphone with “L” into your left ear, the microphone with “R” your right ear.

Example:

Microphone with “L”

4Take your usual listening position with the microphones and the remote control.

CAUTION:

Keep quiet so that Precise Surround Setup can detect test tones properly.

Precise Surround Setup starts detecting the speaker and subwoofer information.

•When starting Precise Surround Setup, the muting mode and Dimmer are automatically canceled.

•“MEASURING 1” flashes on the display.

Current speaker*1

*1 When the current speaker is the right or left surround back speaker, two surround back speaker indicators () light up at a time.

A test tone comes out of each speaker in the following order, then the microphones pick up the test tones and feedback it to the receiver:

FL (Left front speaker) = C (Center speaker) = FR (Right front speaker) = SR (Right surround speaker)

=SBR (Right surround back speaker)*2 = SBL (Left surround back speaker)*2 = SL (Left surround speaker)

=SW (Subwoofer)

*2 When using a single speaker for the surround back speaker, the test tone comes out of “SB (Surround back speaker)” instead of “SBR” and “SBL.”

•Do not touch the microphones while the microphones are picking up the test tones.

‘

The receiver generates test tones again.

Precise Surround Setup starts detecting, adjusts the sound output level from each speaker, and corrects the frequency response of each speaker.

• “MEASURING 2” flashes on the display.

‘

When Precise Surround Setup is completed, “COMPLETE” appears and the PSS indicator lights up on the display.

PSS indicator

5Press and hold PSS on the remote control for about 4 seconds until “PSS START” starts flashing on the display.

PSS

•If Precise Surround Setup is not completed properly...

An error message will appear on the display. In such a case, see “Troubleshooting for Precise Surround Setup“ on page 19.

‘

An optimized test tone comes out of each speaker so that you can confirm the results of Precise Surround Setup, and the corrected frequency response of each speaker appears on the display at the same time.

•See “Checking the frequency responses corrected by Precise Surround Setup” on page 18 about the frequency responses on the display.

‘

The receiver automatically returns to the normal operation mode after all the test tones have been output from the speakers.

Continued on the next page

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Precautions FeaturesTable of Contents Remote control When operating a DVD player, set the mode selector i to DVDParts identification Front Panel Display windowDVR/DVD, VCR, VIDEO, TV, USB, FM, AM TA, NEWS, InfoVideovcr IN, DVR/DVD IN, Monitor OUT Rear PanelVideo IN, DVR/DVD CENTER, SUBWOOFER, SURR-L, SURR-RBefore installation Putting the batteries in the remote controlGetting started Connecting the FM and AM MW antennas AM MW antenna connectionFM antenna connection Connecting the speakers Connecting the speakersClose the terminal Turn the knob clockwiseConverting video signals into Hdmi signals Connecting video componentsHdmi connection Turn off all components before making connectionsScart connection Scart Terminal SpecificationsFor an analog decoder For T-V LinkComponent S-video Composite Audio/video connectionTo component video output To left/right audio channel outputWhen you enjoy the sound recorded in DVD-Audio With analog methodWith digital method Connecting a TV Connecting a VCR and another video componentDBS tuner, etc White Red Composite video cable not supplied Video cable not suppliedDigital audio connection Connecting the power cordDigital output terminal Digital input terminalsCheck if the drivers are correctly installed How to install the USB driversUSB connection Turn on your PCBefore starting Precise Surround Setup Operating procedureVolume of test tones is not adjustable If Precise Surround Setup is not completed properly PSS indicatorPut on the microphones = SW SubwooferTurning the frequency optimizing function off From the remote control onlyUnplug the earphone-type microphones Press Test again to stop the test tonePossible cause Solution Troubleshooting for Precise Surround Setup3Adjust the volume 1Turn on the powerBasic operations 2Select the source to playListening with headphones Selecting the video and audio input settingsSelecting the video input setting Selecting the audio input settingTo restore the sound, press Muting again From the remote control only Press Dimmer repeatedlyChanging the display brightness Linear PCMBasic adjustment of auto memory Turning off the power with the Sleep TimerFrom the remote control only Press Sleep repeatedly Making sounds naturalUsing preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modePress PTY Search while listening to an FM station Press Display while listening to an FM stationOn the display About characters shown on the displayDescription of the PTY codes PTY codesTest News News Switching to broadcast program of your choice temporarilyBasic setting items Basic settingsSetting the speakers Operating procedureSubwoofer Back OUTSetting the speaker distance Activating the EX/ES/PLIIx setting- EX/ES/PLIIxAuto OFFSetting the crossover frequency-CROSSOVER Setting bass soundMain SW LFEUsing the Midnight mode Setting the Audio delay levelLFE ATT Hdmi Video Setting the auto function modeHdmi VCR ManualBasic adjustment items Sound adjustmentsPress Adjust Turn Multi JOG to adjust the selected itemAdjust the speaker output levels Adjusting the speaker output levelsFrom the remote control You can adjust the speaker output levelsEffect Adjusting the sound parameters for the Surround/DSP modesATT on ATT NormalDimension Center WidthCenter Align Introducing the Surround modes Dolby DigitalDolby Surround DTS Digital Surround DTSDTS Extended Surround DTS-ES DTS 96/24Introducing the DSP modes About other digital signalsDigital Acoustic Processor DAP modes Mono FilmUsing the Surround/DSP modes 3D Headphone modeDTS Auto Surround About the DSP modesVirtual Surround Back DTS-ESTurn Multi JOG to select the Surround DSP mode you want From the remote control Select and play any sourceTo cancel Surround/DSP modes Press SurroundOperating other JVC products VCRChannel + DVD recorder or DVD player Release DVR/DVDSET JVC Manufacturer codes for TV CodesIf more than one code is listed for your brand of VCR, try VCRManufacturer codes for VCR Codes CGMMenu Try to operate your DVD player by Pressing DVR/DVDTroubleshooting Problem Possible Cause SolutionPower Remote control Tuner Set the mode selector to the properButton before operation Hdmi SpecificationsRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents