JVC RX-D411S Changing the display brightness, To restore the sound, press Muting again, 96/24

Page 26

Selecting the digital decode mode

When “HDMI” or “DIGITAL” is selected for the audio input setting (see page 21), this receiver automatically detects the incoming digital signal format and sets the digital decode mode to “DIGITAL AUTO.”

• The DIGITAL AUTO indicator lights up on the display.

If the following symptoms occur while playing Dolby Digital or DTS software with “DIGITAL AUTO” selected, follow the procedure below:

•Sound does not come out at the beginning of playback.

•Noise comes out while searching for or skipping chapters or tracks.

From the remote control ONLY:

Press DECODE to select “DOLBY DIGITAL” or “DTS.”

•Each time you press DECODE, the digital decode mode changes as follows:

DIGITAL AUTO = DOLBY DIGITAL = DTS = (Back to the beginning)

•To play back software encoded with Dolby Digital, select “DOLBY DIGITAL.”

•To play back software encoded with DTS, select “DTS.”

NOTES

•The digital decode mode is fixed to “DIGITAL AUTO” when selecting “USB” as the source.

•“DOLBY DIGITAL” or “DTS” is automatically reset to “DIGITAL AUTO” in the following cases:

–When you turn off the receiver.

–When you select another source.

–When you change the audio input setting (see page 21).

The following digital signal format indicators on the display indicate what type of signal comes into the receiver. See pages 39 to 41 for the details of each digital signal format.

Turning off the sounds temporarily

From the remote control ONLY:

Press MUTING to turn off the sound through all connected speakers and headphones.

“MUTING” appears on the display and the volume turns off.

To restore the sound, press MUTING again.

•Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restores the sound.

NOTE

When performing Precise Surround Setup or turning the power off, muting is automatically canceled.

Changing the display brightness

You can dim the display—Dimmer.

From the remote control ONLY:

Press DIMMER repeatedly.

•Each time you press the button, the display brightness changes as follows:

DIMMER 1 Dims the display.

DIMMER 2 Dims the display more than DIMMER 1.

DIMMER 3 Turns off the display.

(Temporarily canceled when you operate the receiver.)

DIMMER OFF Cancels the Dimmer (normal display).

NOTE

When performing Precise Surround Setup, Dimmer is automatically canceled.

LINEAR PCM:

:

:

96/24:

NOTE

•Lights up when Linear PCM signal comes in.

•When the multi-channel PCM signal comes in, “MULTI CH PCM” appears on the display for a while.

Lights up when Dolby Digital signal comes in.

•Flashes when “DOLBY DIGITAL” is selected for any software other than Dolby Digital.

Lights up when conventional DTS signal comes in.

•Flashes when “DTS” is selected for any software other than DTS.

Lights up when DTS 96/24 signal comes in.

When “DIGITAL AUTO” cannot recognize the incoming signal, no digital signal format indicator lights up on the display.

22

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Features PrecautionsTable of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector i to DVD DVR/DVD, VCR, VIDEO, TV, USB, FM, AM Display windowFront Panel TA, NEWS, InfoVideo IN, DVR/DVD Rear PanelVideovcr IN, DVR/DVD IN, Monitor OUT CENTER, SUBWOOFER, SURR-L, SURR-RGetting started Before installationPutting the batteries in the remote control FM antenna connection Connecting the FM and AM MW antennasAM MW antenna connection Close the terminal Connecting the speakersConnecting the speakers Turn the knob clockwiseHdmi connection Connecting video componentsConverting video signals into Hdmi signals Turn off all components before making connectionsFor an analog decoder Scart Terminal SpecificationsScart connection For T-V LinkTo component video output Audio/video connectionComponent S-video Composite To left/right audio channel outputWith digital method When you enjoy the sound recorded in DVD-AudioWith analog method DBS tuner, etc White Red Connecting a VCR and another video componentConnecting a TV Composite video cable not supplied Video cable not suppliedDigital output terminal Connecting the power cordDigital audio connection Digital input terminalsUSB connection How to install the USB driversCheck if the drivers are correctly installed Turn on your PCVolume of test tones is not adjustable Before starting Precise Surround SetupOperating procedure Put on the microphones PSS indicatorIf Precise Surround Setup is not completed properly = SW SubwooferUnplug the earphone-type microphones From the remote control onlyTurning the frequency optimizing function off Press Test again to stop the test toneTroubleshooting for Precise Surround Setup Possible cause SolutionBasic operations 1Turn on the power3Adjust the volume 2Select the source to playSelecting the video input setting Selecting the video and audio input settingsListening with headphones Selecting the audio input settingChanging the display brightness From the remote control only Press Dimmer repeatedlyTo restore the sound, press Muting again Linear PCMFrom the remote control only Press Sleep repeatedly Turning off the power with the Sleep TimerBasic adjustment of auto memory Making sounds naturalTo store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationOn the display Press Display while listening to an FM stationPress PTY Search while listening to an FM station About characters shown on the displayTest Description of the PTY codesPTY codes Switching to broadcast program of your choice temporarily News NewsBasic settings Basic setting itemsSubwoofer Operating procedureSetting the speakers Back OUTAuto Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance OFFMain Setting bass soundSetting the crossover frequency-CROSSOVER SW LFELFE ATT Using the Midnight modeSetting the Audio delay level Hdmi VCR Setting the auto function modeHdmi Video ManualPress Adjust Sound adjustmentsBasic adjustment items Turn Multi JOG to adjust the selected itemFrom the remote control Adjusting the speaker output levelsAdjust the speaker output levels You can adjust the speaker output levelsATT on Adjusting the sound parameters for the Surround/DSP modesEffect ATT NormalCenter Align DimensionCenter Width Dolby Surround Introducing the Surround modesDolby Digital DTS Extended Surround DTS-ES DTSDTS Digital Surround DTS 96/24Digital Acoustic Processor DAP modes About other digital signalsIntroducing the DSP modes Mono FilmDTS Using the Surround/DSP modes3D Headphone mode Virtual Surround Back About the DSP modesAuto Surround DTS-ESTo cancel Surround/DSP modes From the remote control Select and play any sourceTurn Multi JOG to select the Surround DSP mode you want Press SurroundChannel + Operating other JVC productsVCR SET DVD recorder or DVD playerRelease DVR/DVD Manufacturer codes for TV Codes JVCManufacturer codes for VCR Codes VCRIf more than one code is listed for your brand of VCR, try CGMTry to operate your DVD player by Pressing DVR/DVD MenuPower TroubleshootingProblem Possible Cause Solution Button before operation Remote control TunerSet the mode selector to the proper Specifications HdmiRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents