JVC RX-D411S manual When you enjoy the sound recorded in DVD-Audio, With analog method

Do not connect the AC power cord until all other connections have been made.

Connecting a DVD recorder or DVD player with its analog discrete output jacks (DVD MULTI IN):

If your DVD recorder or DVD player has analog 5.1 channel output jacks, use the connection below. When a DVD-Audio disc is played back, the original high-quality multi-channel sounds can be reproduced by using this connection.

Turn off all components before making connections.

• When you connect the components, refer also to their manuals.

Green	: signal flow
Blue	Component video cable (not supplied)
Red

		Monaural audio cable
		(not supplied)
White	White	Stereo audio cable
		(not supplied)
Red	Red

DVD recorder or

Stereo audio cable (not supplied) Monaural audio cable DVD player (not supplied)

Å	To left/right surround channel audio output	Î	To subwoofer output
ı	To center channel audio output	‰	To left/right front channel audio output

ÇTo component video output

• Connect Y, PB, and PR correctly.

When you enjoy the sound recorded in DVD-Audio...
	NOTES
You can enjoy the sound recorded in DVD-Audio with either	• When selecting “A MULTI” for the audio input setting and using
analog or digital methods.	the headphones, you can listen to the front channel sounds (left
– With analog method:	and right) only. The 3D HEADPHONE mode (see page 42) is not
1.Connect your DVD recorder or DVD player to this	available.
receiver according to the diagram above.	• When selecting “A MULTI” for the audio input setting or when
2.Select “A MULTI” for the audio input setting. (See page	multi-channel PCM signals (see page 41) are coming in with
21.)	selecting “HDMI” for the audio input setting, the following items
	are not available:
– With digital method:
	– Precise Surround Setup (see pages 16 to 19)
1.Connect your DVD recorder or DVD player and TV to this
	– Decode mode (see page 22)
receiver with the HDMI cables. (See page 9.)
	– CC Converter (see page 23)
2.Select “HDMI” for the audio input setting. (See page 21.)
	– EX/ES/PLllx (see page 31)
	– Dual Mono (see page 32)
	– Subwoofer output (see page 32)
	– Crossover frequency (see page 32)
	– Low frequency effect attenuator (see page 33)
	– Midnight mode (see page 33)
	– Digital equalization patterns (see page 36)
	– Bass Boost (see page 37)
	– Input attenuator mode (see page 37)
	– Sound parameters for Surround/DSP modes (see pages 37 and
	38)
	– Surround/DSP mode selection (see page 44)
	• The audio delay level setting (see page 33) does not take effect
	when selecting “A MULTI” for the audio input setting.
	• When you enjoy the sound recorded in DVD-Audio through the
	HDMI connection, use a DVD recorder or DVD player compatible
	with HDMI version 1.1.

12