Page 53
See “Manufacturer codes for DVD player” below.
5 Release DVR/DVD .
Now, you can perform the following operations on the DVD player:
See “Manufacturer codes for STB” below.
4 Release STB .
Now, you can perform the following operation on the STB:
• Keep the button pressed until step 4 is finished.
3 Press DVR/DVD.
4 Enter the manufacturer code using the numeric buttons (1 – 9, 0).
• Keep the button pressed until step 3 is finished.
2 Press STB CONT.
3 Enter the manufacturer code using the numeric buttons (1 – 9, 0).
1 Set the mode selector to “DVD.”
2 Press and hold DVR/DVD .
1 Press and hold STB .
To change the transmittable signals for operating a DVD player
To change the transmittable signals for operating a STB
STB
: Turn on or off the STB.
After pressing STB CONT, you can perform the following operations on the STB.
CHANNEL +/–:Change the channel numbers on the STB.
1 – 9, 0, h10: Select the channel numbers on the STB.
See the instructions supplied with the STB for details.
5Try to operate your STB by pressing STB
.
When your STB turns on or off, you have entered the correct code.
If more than one code is listed for your brand of STB, try
each one until the correct one is entered.
Manufacturer codes for STB
Manufacturer | Codes |
JVC | 01, 02 |
Amstrad | 03, 04, 05, 06, 31 |
BT | 01 |
Canal Satellite | 20 |
Canal+ | 20 |
D-Box | 24 |
Echostar | 17, 18, 19, 21 |
Finlux | 11 |
Force | 28 |
Galaxis | 27 |
Grundig | 07, 08 |
Hirschmann | 07, 17, 37 |
ITT Nokia | 11 |
Jerrold | 16 |
Kathrein | 13, 14, 34 |
Luxor | 11 |
Mascom | 32 |
Maspro | 13 |
Nokia | 24, 26, 33 |
Pace | 10, 25, 31 |
Panasonic | 15 |
Philips | 09, 23 |
RFT | 12 |
Saba | 35 |
Sagem | 22, 29 |
Salora | 11 |
Selector | 29 |
Skymaster | 12, 36 |
Thomson | 35 |
TPS | 22 |
Triax | 30 |
Wisi | 07 |
Initial setting: 01
DVR/DVD : | Turn on or off the DVD player. |
3: | Start playback. |
¢: | Skip to the beginning of the next |
| chapter (or fast-forward for some |
| models). |
4: | Return to the beginning of the |
| current chapter (or fast-reverse for |
| some models). |
7: | Stop playback. |
8: | Pause playback. To release it, press 3. |
MENU: | Display the menu recorded on DVD |
| VIDEO discs. |
5/∞/3/2: | Select an item on the menu screen. |
SET: | Enter the selected item. |
1 – 9, 0, h10: | Select the chapter number. |
See the manual supplied with the DVD player for details.
6Try to operate your DVD player by
pressing DVR/DVD
.
Your DVD player turns on or off when you have entered the correct code.
Manufacturer codes for DVD player:
Manufacturer | Codes |
JVC | 01 |
Kenwood | 02, 03 |
Mitsubishi | 06 |
Panasonic | 07 |
Philips | 05 |
Pioneer | 08 |
Sony | 09 |
Toshiba | 04 |
Yamaha | 10 |
Initial setting: 01
NOTE
You cannot use this remote control to operate any manufacturers’ DVD recorders other than JVC’s.
Manufacturer codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
49
Contents
RX-D411S
Important for the U.K
Information for Users on Disposal of Old Equipment
Above ALL
Precautions
Features
Table of Contents
Parts identification
Remote control
When operating a DVD player, set the mode selector i to DVD
Front Panel
Display window
DVR/DVD, VCR, VIDEO, TV, USB, FM, AM
TA, NEWS, Info
Videovcr IN, DVR/DVD IN, Monitor OUT
Rear Panel
Video IN, DVR/DVD
CENTER, SUBWOOFER, SURR-L, SURR-R
Getting started
Before installation
Putting the batteries in the remote control
FM antenna connection
Connecting the FM and AM MW antennas
AM MW antenna connection
Connecting the speakers
Connecting the speakers
Close the terminal
Turn the knob clockwise
Converting video signals into Hdmi signals
Connecting video components
Hdmi connection
Turn off all components before making connections
Scart connection
Scart Terminal Specifications
For an analog decoder
For T-V Link
Component S-video Composite
Audio/video connection
To component video output
To left/right audio channel output
With digital method
When you enjoy the sound recorded in DVD-Audio
With analog method
Connecting a TV
Connecting a VCR and another video component
DBS tuner, etc White Red
Composite video cable not supplied Video cable not supplied
Digital audio connection
Connecting the power cord
Digital output terminal
Digital input terminals
Check if the drivers are correctly installed
How to install the USB drivers
USB connection
Turn on your PC
Volume of test tones is not adjustable
Before starting Precise Surround Setup
Operating procedure
If Precise Surround Setup is not completed properly
PSS indicator
Put on the microphones
= SW Subwoofer
Turning the frequency optimizing function off
From the remote control only
Unplug the earphone-type microphones
Press Test again to stop the test tone
Possible cause Solution
Troubleshooting for Precise Surround Setup
3Adjust the volume
1Turn on the power
Basic operations
2Select the source to play
Listening with headphones
Selecting the video and audio input settings
Selecting the video input setting
Selecting the audio input setting
To restore the sound, press Muting again
From the remote control only Press Dimmer repeatedly
Changing the display brightness
Linear PCM
Basic adjustment of auto memory
Turning off the power with the Sleep Timer
From the remote control only Press Sleep repeatedly
Making sounds natural
Using preset tuning
Tuning in to stations manually
To store the preset stations
Tuner operations
To tune in a preset station
Selecting the FM reception mode
Press PTY Search while listening to an FM station
Press Display while listening to an FM station
On the display
About characters shown on the display
Test
Description of the PTY codes
PTY codes
News News
Switching to broadcast program of your choice temporarily
Basic setting items
Basic settings
Setting the speakers
Operating procedure
Subwoofer
Back OUT
Setting the speaker distance
Activating the EX/ES/PLIIx setting- EX/ES/PLIIx
Auto
OFF
Setting the crossover frequency-CROSSOVER
Setting bass sound
Main
SW LFE
LFE ATT
Using the Midnight mode
Setting the Audio delay level
Hdmi Video
Setting the auto function mode
Hdmi VCR
Manual
Basic adjustment items
Sound adjustments
Press Adjust
Turn Multi JOG to adjust the selected item
Adjust the speaker output levels
Adjusting the speaker output levels
From the remote control
You can adjust the speaker output levels
Effect
Adjusting the sound parameters for the Surround/DSP modes
ATT on
ATT Normal
Center Align
Dimension
Center Width
Dolby Surround
Introducing the Surround modes
Dolby Digital
DTS Digital Surround
DTS
DTS Extended Surround DTS-ES
DTS 96/24
Introducing the DSP modes
About other digital signals
Digital Acoustic Processor DAP modes
Mono Film
DTS
Using the Surround/DSP modes
3D Headphone mode
Auto Surround
About the DSP modes
Virtual Surround Back
DTS-ES
Turn Multi JOG to select the Surround DSP mode you want
From the remote control Select and play any source
To cancel Surround/DSP modes
Press Surround
Channel +
Operating other JVC products
VCR
SET
DVD recorder or DVD player
Release DVR/DVD
JVC
Manufacturer codes for TV Codes
If more than one code is listed for your brand of VCR, try
VCR
Manufacturer codes for VCR Codes
CGM
Menu
Try to operate your DVD player by Pressing DVR/DVD
Power
Troubleshooting
Problem Possible Cause Solution
Button before operation
Remote control Tuner
Set the mode selector to the proper
Hdmi
Specifications
RX-D411S AUDIO/VIDEO Control Receiver