JVC RX-D411S manual Sound adjustments, Basic adjustment items, Press Adjust

Sound adjustments

You can make sound adjustment to your preference after completing basic setting.

Basic adjustment items

You can adjust the following items. See pages in parentheses for details.

•You cannot select the items which is not available with the current setting.

Items	To do
SUBWFR LVL*1, 2	Adjust the subwoofer output level. (36)
FRONT L LVL*1, 2	Adjust the left front speaker output level.
	(36)
FRONT R LVL*1, 2	Adjust the right front speaker output level.
	(36)
CENTER LVL*1, 2	Adjust the center speaker output level. (36)
SURR L LVL*1, 2	Adjust the left surround speaker output
	level. (36)
SURR R LVL*1, 2	Adjust the right surround speaker output
	level. (36)
S BACK LVL*1, 2	Adjust the surround back speaker output
	level when using a single speaker for the
	surround back speaker. (36)
S BACK L LVL*1, 2	Adjust the left surround back speaker
	output level. (36)
S BACK R LVL*1, 2	Adjust the right surround back speaker
	output level. (36)
D EQ 63Hz*1	Adjust the equalization pattern of each
D EQ 250Hz*1	band. (36)
D EQ 1kHz*1
D EQ 4kHz*1
D EQ 16kHz*1
BASS BOOST*1	Boost the bass level. (37)
INPUT ATT	Attenuate the input level of analog source.
	(37)
EFFECT*1	Adjust the effect level. (37)
ROOM SIZE	Select the room size for your virtual
	listening room. (37)
LIVENESS	Select the liveness level for your virtual
	listening room. (37)
PANORAMA	Add “wraparound” sound effect with
	sidewall image. (38)
CENTER WIDTH	Adjust the center channel localization
	between the center speaker and the left/
	right speakers. (38)
DIMENSION	Adjust sound localization pattern. (38)
CENTER GAIN	Adjust the sound localization of the center
	channel. (38)
CENTER TONE	Make the center tone soft or sharp. (38)
CENTER ALIGN	Align the vertical localization of the center
	channel signals. (38)

*1 You can adjust these items directly from the remote control. *2 If you have performed Precise Surround Setup on pages 16

to 18, these settings are not required.

NOTE

Some items are not available in the following cases below:

–When selecting “A MULTI” for the audio input setting (see page 12)

–When multi-channel PCM signals (see page 41) are coming in with selecting “HDMI” for the audio input setting (see page 12)

Operating procedure

On the front panel:

1, 7 3, 5 2, 4

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex.: When adjusting subwoofer output level.

1Press ADJUST.

MULTI JOG now works for the sound adjustment.

2Turn MULTI JOG until the item you want to adjust appears on the display.

•As you turn MULTI JOG, the adjustment items change as follows:

SUBWFR LVL Ô FRONT L LVL Ô FRONT R LVL Ô CENTER LVL Ô SURR L LVL Ô SURR R LVL Ô

S BACK LVL Ô S BACK L LVL Ô S BACK R LVL Ô D EQ 63Hz Ô D EQ 250Hz Ô D EQ 1kHz Ô

D EQ 4kHz Ô D EQ 16kHz Ô BASS BOOST Ô INPUT ATT Ô EFFECT Ô ROOM SIZE Ô LIVENESS Ô PANORAMA Ô CENTER WIDTH Ô DIMENSION Ô CENTER GAIN Ô CENTER TONE Ô CENTER ALIGN Ô (Back to the beginning)

3Press SET.

The current setting for the selected item appears.

4Turn MULTI JOG to adjust the selected item.

–10 0 +10

5Press SET.

Your adjustment is stored.

6Repeat steps 2 to 5 to adjust other items if necessary.

7Press ADJUST.

The source indication resumes on the display.

35