JVC RX-D411S manual Switching to broadcast program of your choice temporarily, News News

Page 32

Switching to broadcast program of your choice temporarily

Another convenient Radio Data System service is called “Enhanced Other Networks.”

This allows the receiver to switch temporarily to a broadcast program of your choice (TA, NEWS, and/or INFO) from a different station except in the following case:

•The Enhanced Other Networks mode only works when receiving an FM station with the Enhanced Other Networks code.

Before you start, remember...

The Enhanced Other Networks function is only applicable to preset FM stations.

Press TA/NEWS/INFO repeatedly until the program type you want appears on the display.

•Each time you press the button, the program type(s) change, and the corresponding indicator(s) light up as follows:

TA = NEWS = INFO = TA/NEWS =TA/INFO = NEWS/INFO = TA/NEWS/INFO = Canceled = (Back to the beginning)

TA: Traffic Announcement in your area.

NEWS: News.

INFO: Program the purpose of which is to impart advice in the widest sense.

How the Enhanced Other Networks function works:

If another FM station starts broadcasting the program type you have selected while you are listening to an FM station

The receiver automatically switches to the station. The indicator of the received program type starts flashing.

‘

When the program is over, the receiver goes back to the station previously tuned in, but still remains in Enhanced Other Networks standby mode. The indicator of the received program type stops flashing and remains lit.

If the station currently tuned in starts broadcasting the program type you have selected

The receiver continues to receive the station, but the indicator of the received program type starts flashing.

‘

When the program is over, the indicator of the received program type stops flashing and remains lit, but the receiver remains in Enhanced Other Networks standby mode.

To stop listening to the program selected by Enhanced Other Networks

Press TA/NEWS/INFO repeatedly again so that the program type (PTY) indicators go off from the display. The receiver exits from Enhanced Other Networks standby mode and goes back to the previously selected station.

When an emergency broadcast (Alarm ! signal) is sent from an FM station

The receiver automatically tunes in to the station except in the following cases:

•When you are listening to non-Radio Data System Networks—all AM (MW) stations, some FM stations and other sources.

•When the receiver is in standby mode.

While receiving an emergency broadcast, “Alarm !” appears on the display.

The TEST signal is used for equipment test—whether it can receive the Alarm ! signal correctly

The TEST signal makes the receiver work in the same way as the Alarm ! signal does. If the TEST signal is received, the receiver automatically switches to the station broadcasting the TEST signal.

While receiving the TEST signal, “TEST” appears on the display.

NOTES

•Enhanced Other Networks data sent from some stations may not be compatible with this receiver.

•Enhanced Other Networks does not function for some FM stations with Radio Data System service.

•While listening to a program tuned in by the Enhanced Other Networks function, the station does not change even if another network station starts broadcasting a program of the same Enhanced Other Networks data.

•While listening to a program tuned in by the Enhanced Other Networks function, you can only use the TA/NEWS/INFO and

DISPLAY.

CAUTION:

If the stations alternate intermittently between the station tuned by the Enhanced Other Networks function and the currently tuned station, press TA/NEWS/INFO repeatedly to cancel the Enhanced Other Networks function.

If you do not press the button, the currently tuned station is received finally, and the indication of the Enhanced Other Networks data type flashing on the display disappears.

28

Page 31 Page 33
Image 32
Page 31 Page 33
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Features PrecautionsTable of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector i to DVD Display window Front PanelDVR/DVD, VCR, VIDEO, TV, USB, FM, AM TA, NEWS, InfoRear Panel Videovcr IN, DVR/DVD IN, Monitor OUTVideo IN, DVR/DVD CENTER, SUBWOOFER, SURR-L, SURR-RGetting started Before installationPutting the batteries in the remote control FM antenna connection Connecting the FM and AM MW antennasAM MW antenna connection Connecting the speakers Connecting the speakersClose the terminal Turn the knob clockwiseConnecting video components Converting video signals into Hdmi signalsHdmi connection Turn off all components before making connectionsScart Terminal Specifications Scart connectionFor an analog decoder For T-V LinkAudio/video connection Component S-video CompositeTo component video output To left/right audio channel outputWith digital method When you enjoy the sound recorded in DVD-AudioWith analog method Connecting a VCR and another video component Connecting a TVDBS tuner, etc White Red Composite video cable not supplied Video cable not suppliedConnecting the power cord Digital audio connectionDigital output terminal Digital input terminalsHow to install the USB drivers Check if the drivers are correctly installedUSB connection Turn on your PCVolume of test tones is not adjustable Before starting Precise Surround SetupOperating procedure PSS indicator If Precise Surround Setup is not completed properlyPut on the microphones = SW SubwooferFrom the remote control only Turning the frequency optimizing function offUnplug the earphone-type microphones Press Test again to stop the test toneTroubleshooting for Precise Surround Setup Possible cause Solution1Turn on the power 3Adjust the volumeBasic operations 2Select the source to playSelecting the video and audio input settings Listening with headphonesSelecting the video input setting Selecting the audio input settingFrom the remote control only Press Dimmer repeatedly To restore the sound, press Muting againChanging the display brightness Linear PCMTurning off the power with the Sleep Timer Basic adjustment of auto memoryFrom the remote control only Press Sleep repeatedly Making sounds naturalTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationPress Display while listening to an FM station Press PTY Search while listening to an FM stationOn the display About characters shown on the displayTest Description of the PTY codesPTY codes Switching to broadcast program of your choice temporarily News NewsBasic settings Basic setting itemsOperating procedure Setting the speakersSubwoofer Back OUTActivating the EX/ES/PLIIx setting- EX/ES/PLIIx Setting the speaker distanceAuto OFFSetting bass sound Setting the crossover frequency-CROSSOVERMain SW LFELFE ATT Using the Midnight modeSetting the Audio delay level Setting the auto function mode Hdmi VideoHdmi VCR ManualSound adjustments Basic adjustment itemsPress Adjust Turn Multi JOG to adjust the selected itemAdjusting the speaker output levels Adjust the speaker output levelsFrom the remote control You can adjust the speaker output levelsAdjusting the sound parameters for the Surround/DSP modes EffectATT on ATT NormalCenter Align DimensionCenter Width Dolby Surround Introducing the Surround modesDolby Digital DTS DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24About other digital signals Introducing the DSP modesDigital Acoustic Processor DAP modes Mono FilmDTS Using the Surround/DSP modes3D Headphone mode About the DSP modes Auto SurroundVirtual Surround Back DTS-ESFrom the remote control Select and play any source Turn Multi JOG to select the Surround DSP mode you wantTo cancel Surround/DSP modes Press SurroundChannel + Operating other JVC productsVCR SET DVD recorder or DVD playerRelease DVR/DVD Manufacturer codes for TV Codes JVCVCR If more than one code is listed for your brand of VCR, tryManufacturer codes for VCR Codes CGMTry to operate your DVD player by Pressing DVR/DVD MenuPower TroubleshootingProblem Possible Cause Solution Button before operation Remote control TunerSet the mode selector to the proper Specifications HdmiRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents