JVC RX-D411S Remote control Tuner, Button before operation, Set the mode selector to the proper

Page 55

Remote control

Tuner

PROBLEM

POSSIBLE CAUSE

SOLUTION

The remote control does not

The remote control is not ready for your

Set the mode selector correctly, then

operate as you intend.

intended operation.

press the corresponding source selecting

 

 

button before operation.

 

 

 

The remote control does not

There is an obstruction blocking the

Remove the obstruction.

work.

remote sensor on the receiver.

 

 

 

 

 

Batteries are weak.

Replace batteries.

 

 

 

 

The mode selector is set to the incorrect

Set the mode selector to the proper

 

position.

position.

Continuous hiss or buzzing

Incoming signal is too weak.

Connect an outdoor FM antenna (not

during FM reception.

 

supplied) after unplugging the power

 

 

cord, or contact your dealer.

 

 

 

 

The station is too far away.

Select another station.

 

 

 

 

A wrong antenna is being used.

Check with your dealer to be sure you

 

 

have the correct antenna.

 

 

 

 

Antennas are not connected properly.

Check the connections.

 

 

 

Occasional cracking noise during

Ignition noise from automobiles.

Move the antenna farther from

FM reception.

 

automobile traffic.

 

 

 

51

Page 54 Page 56
Image 55
Page 54 Page 56
Contents RX-D411S Important for the U.K Information for Users on Disposal of Old Equipment Above ALL Precautions FeaturesTable of Contents When operating a DVD player, set the mode selector i to DVD Remote controlParts identification TA, NEWS, Info Display windowFront Panel DVR/DVD, VCR, VIDEO, TV, USB, FM, AMCENTER, SUBWOOFER, SURR-L, SURR-R Rear PanelVideovcr IN, DVR/DVD IN, Monitor OUT Video IN, DVR/DVDPutting the batteries in the remote control Before installationGetting started AM MW antenna connection Connecting the FM and AM MW antennasFM antenna connection Turn the knob clockwise Connecting the speakersConnecting the speakers Close the terminalTurn off all components before making connections Connecting video componentsConverting video signals into Hdmi signals Hdmi connectionFor T-V Link Scart Terminal SpecificationsScart connection For an analog decoderTo left/right audio channel output Audio/video connectionComponent S-video Composite To component video outputWith analog method When you enjoy the sound recorded in DVD-AudioWith digital method Composite video cable not supplied Video cable not supplied Connecting a VCR and another video componentConnecting a TV DBS tuner, etc White RedDigital input terminals Connecting the power cordDigital audio connection Digital output terminalTurn on your PC How to install the USB driversCheck if the drivers are correctly installed USB connectionOperating procedure Before starting Precise Surround SetupVolume of test tones is not adjustable = SW Subwoofer PSS indicatorIf Precise Surround Setup is not completed properly Put on the microphonesPress Test again to stop the test tone From the remote control onlyTurning the frequency optimizing function off Unplug the earphone-type microphonesPossible cause Solution Troubleshooting for Precise Surround Setup2Select the source to play 1Turn on the power3Adjust the volume Basic operationsSelecting the audio input setting Selecting the video and audio input settingsListening with headphones Selecting the video input settingLinear PCM From the remote control only Press Dimmer repeatedlyTo restore the sound, press Muting again Changing the display brightnessMaking sounds natural Turning off the power with the Sleep TimerBasic adjustment of auto memory From the remote control only Press Sleep repeatedlyTuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsTo tune in a preset station Selecting the FM reception modeAbout characters shown on the display Press Display while listening to an FM stationPress PTY Search while listening to an FM station On the displayPTY codes Description of the PTY codesTest News News Switching to broadcast program of your choice temporarilyBasic setting items Basic settingsBack OUT Operating procedureSetting the speakers SubwooferOFF Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance AutoSW LFE Setting bass soundSetting the crossover frequency-CROSSOVER MainSetting the Audio delay level Using the Midnight modeLFE ATT Manual Setting the auto function modeHdmi Video Hdmi VCRTurn Multi JOG to adjust the selected item Sound adjustmentsBasic adjustment items Press AdjustYou can adjust the speaker output levels Adjusting the speaker output levelsAdjust the speaker output levels From the remote controlATT Normal Adjusting the sound parameters for the Surround/DSP modesEffect ATT onCenter Width DimensionCenter Align Dolby Digital Introducing the Surround modesDolby Surround DTS 96/24 DTSDTS Digital Surround DTS Extended Surround DTS-ESMono Film About other digital signalsIntroducing the DSP modes Digital Acoustic Processor DAP modes3D Headphone mode Using the Surround/DSP modesDTS DTS-ES About the DSP modesAuto Surround Virtual Surround BackPress Surround From the remote control Select and play any sourceTurn Multi JOG to select the Surround DSP mode you want To cancel Surround/DSP modesVCR Operating other JVC productsChannel + Release DVR/DVD DVD recorder or DVD playerSET JVC Manufacturer codes for TV CodesCGM VCRIf more than one code is listed for your brand of VCR, try Manufacturer codes for VCR CodesMenu Try to operate your DVD player by Pressing DVR/DVDProblem Possible Cause Solution TroubleshootingPower Set the mode selector to the proper Remote control TunerButton before operation Hdmi SpecificationsRX-D411S AUDIO/VIDEO Control Receiver

RX-D411S specifications

The JVC RX-D411S is a versatile and robust audio receiver designed to meet the needs of modern music enthusiasts and home theater aficionados alike. This model stands out with its combination of superior sound quality, user-friendly features, and an array of connectivity options.

At the heart of the RX-D411S lies its advanced amplification system that delivers a power output of 100 watts per channel, ensuring that your audio experience is both dynamic and satisfying. This power rating enables the receiver to drive a wide variety of speakers, making it suitable for various home setups, whether for music listening or movie watching.

One of the most notable features of the RX-D411S is its support for multiple audio formats, including Dolby Digital and DTS surround sound. This allows users to enjoy their favorite movies and TV shows with immersive soundscapes that enhance the viewing experience. Additionally, the receiver is equipped with an FM/AM tuner, providing access to an extensive range of radio stations.

The RX-D411S also incorporates advanced digital signal processing (DSP) technology, which optimizes audio output for various environments, ensuring rich and clear sound reproduction regardless of the space. For music lovers, the receiver supports several audio sources, including CD players, vinyl turntables, and streaming devices, connecting seamlessly through multiple inputs like optical, coaxial, and RCA.

In terms of connectivity, the RX-D411S comes equipped with Bluetooth technology, allowing users to stream music wirelessly from their smartphones and other Bluetooth-enabled devices. This feature adds a layer of convenience to the user experience, enabling effortless access to music libraries and streaming services.

The receiver is designed with a sleek and modern aesthetic, making it a stylish addition to any home entertainment center. Its intuitive interface, supported by a clear and concise remote control, enhances user experience, allowing for easy navigation and adjustments.

Overall, the JVC RX-D411S is an impressive audio receiver that combines power, versatility, and cutting-edge technology. With its broad feature set and reliable performance, it remains a popular choice among audio enthusiasts seeking to enhance both their music and home theater experiences.
Top Page Image Contents