Weider 831.153931 user manual A 3/8 Nylon Jamnut, Pulley, Locate the Butterfly Cable 69, which is

29.Wrap the Lat Cable (88) around a 3 1/2” Pulley (78). Attach the Pulley and a Long Cable Trap (102)

to the Top Frame (6) with a 3/8” x 1 3/4” Bolt (93)

and a 3/8” Nylon Jamnut (113).	Make sure the
Cable Trap is turned to hold the Cable in the
groove of the Pulley.

30.Remove the preattached 3 1/2” Pulleys (78) from the Pulley Plates (63).

Wrap the Lat Cable (88) around a 3 1/2” Pulley

(78). Attach the Pulley and a Cable Trap (68) to the second set of holes from the top of the Pulley

Plates (63) with a 3/8” x 2” Bolt (100) and a 3/8”

Nylon Locknut (87). Make sure the Cable Trap is turned to hold the Cable in the groove of the

Pulley.

31.Attach the end of the Lat Cable (88) inside of the Butterfly Top Frame (7) with a 5/16” x 2 1/2” Bolt (59), two 5/16” Washers (90), and a 5/16” Nylon Locknut (86).

32.Locate the Butterfly Cable (69), which is the

shortest Cable. Attach the Cable to the Pivot Bracket (70) on the Left Butterfly Arm (25) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).

33.Wrap the Butterfly Cable (69) over a “V”-pulley (55). Attach the Pulley and a Long Cable Trap (102) to

the indicated bracket on the Butterfly Upright (3) with a 3/8” x 2 1/2” Bolt (18) and a 3/8” Nylon

Locknut (87). Make sure that the Long Cable

Trap is turned to hold the Cable in the groove of the Pulley.

14

29		88	78
	113
			102
			93
			6
30
	100
	68		78
			87
	88
	63
31	86	90
			90
			59
	7
	88
32
		86
			69
			103
		70
			25
33
	3
	87	55	102
			18
	69