Weider 831.153931 user manual Before YOU Begin, Using the weight system

Page 4

BEFORE YOU BEGIN

Thank you for selecting the versatile WEIDER		® PRO	1-800-736-6879, Monday through Saturday, 7 a.m.
4850 weight system. The WEIDER		® PRO 4850 weight	until 7 p.m. Central Time (excluding holidays). To help
system offers an impressive array of weight stations			us assist you, please note the product model number
designed to develop every major muscle group of the			and serial number before calling. The model number is
body. Whether your goal is to tone your body, build			831.153931. The serial number can be found on a
dramatic muscle size and strength, or improve your			decal attached to the weight system (see the front
cardiovascular system, the PRO 4850 weight system			cover of this manual for the location of the decal).
will help you to achieve the specific results you want.
			Before reading further, please review the drawing
For your benefit, read this manual carefully before			below and familiarize yourself with the parts that are
using the weight system.	If you have additional		labeled.
questions, please call our toll-free HELPLINE at

	WARNING	ASSEMBLED
	DECAL 1	ASSEMBLED
	DECAL 1	DIMENSIONS:
		DIMENSIONS:
		Height:	81 in.
Lat Bar		Width:	96 in.
Lat Bar		Length:	57 in.
		Length:	57 in.
High Pulley Station
Swivel Carriage		WARNING DECAL 2
		WARNING DECAL 2
		(one on each side)
Butterfly Arm/Press Arm
Backrest
Low Pulley Station			Squat Arm
			Backrest
Curl Pad
		Adjustment Knob
Seat
	WARNING
Leg Lever	DECAL 2
Leg Lever		Squat Knee Rest
		Squat Knee Rest
	Weight Stack
	4

Image 4

Contents Serial Number Decal under seat Model No Serial NoPatent Pending Table of Contents Important Precautions Weight system in the location shownSure that the cables are on all of the pulleys DecalUsing the weight system Before YOU BeginAssembly Them in place Nylon Locknuts Each Carriage Bolt. Do not tighten the Nylon Locknuts yetDo not tighten the Nylon Locknuts yet Hole in the Swivel Upright Adjustment Two indicated 5/16 x 2 1/2 Carriage Bolts 110Locknut 86 onto each Carriage Bolt En the Nylon Locknuts yetMake sure Grooved side is facing downwardDo not tighten the Locknuts yet With the Bolt and a 3/8 Nylon Jamnut Must be able to pivot easily. R8 Nylon Jamnut 113 as shown EasilyLong and has an eyelet on each end Cable in the groove of the Pulley Bolt 100 and a 3/8 Nylon LocknutGroove of the Pulley Attach the end of the Swivel Cable 17 toA 3/8 Nylon Jamnut PulleyLocate the Butterfly Cable 69, which is Locknut 87. Make sure that the Long CableLocate the Leg Lever Cable 75, which is Ed pin on the other endUpright 3 with a 3/8 x 3 3/4 Bolt 122, a 3/8 Washer 91, and a 3/8 Nylon JamnutEnd and a ball on the other end A 3/8 Nylon Locknut 119 122 121 113 Cage 120With a 3/8 x 2 Bolt 100 and a 3/8 Nylon A 3/8 Nylon Locknut 120Only Nylon Locknut 120A 3/8 Nylon Jamnut 124A 3/8 Nylon Locknut Nut 118 halfway onto the endNut against the 1/2 Washer 1. Rem Stack. Replace the PinNylon Locknuts yet Repeat this step with the other end of the Squat ArmTighten all of the 3/8 Nylon Locknuts 87 used in this step Backrest than the top. Attach the Squat Backrest to Press AdjustmentsIng any exercise Adjusting the Squat ARM or Swivel Carriage 115Weight Resistance Chart Lbs TopTroubleshooting Pulley and the Cable Trap between the higher setButterfly Cable DiagramsSwivel High Cable Cable Leg LeverSwivel Low Full 90 DAY Warranty Bags, check to see if it has been pre-assembled R1202A X 3 3/4 BoltPage Round Inner Cap 2 x 2 Inner Cap 2 1/2 Inner Cap Save this Part LIST/EXPLODED Drawing for Future Reference Part LIST-Model No Key Qty DescriptionExploded