Weider 831.153931 Repeat this step with the other end of the Squat Arm, Nylon Locknuts yet

57. Attach the Seat (16) to the Seat Frame (8) with two

1/4” x 3/4” Screws (114), a 1/4” x 2 1/2” Screw (99), and a 1/4” Washer (97).

58. Attach the Butterfly Backrest (15) to the Butterfly Upright (3) with four 1/4” x 3/4” Screws (114).

59.Wet one end of the Squat Arm (32) with soapy water. Slide a Short Pad (20) onto the Squat Arm as shown.

Slide two Nut Clips (108) onto a Squat Handle (33). Attach the Squat Handle to the Squat Arm (32) with

two 5/16” x 3/4” Button Head Screws (51). Slide an Inner Cap w/Hole (111) onto the Squat Handle and

press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8” Handgrip (84) onto the Squat Handle.

Repeat this step with the other end of the Squat

Arm (32).

60.Attach the Squat Arm (32) to the Squat Bracket (37)

with two 3/8” x 2 1/2” Carriage Bolts (106) and two

3/8” Nylon Locknuts (87).	Do not tighten the
Nylon Locknuts yet.

Finish attaching the Squat Arm (32) to the Squat

Bracket (37) with two 3/8” x 3” Carriage Bolts (126), a Small Support Plate (127), and two 3/8” Nylon

Locknuts (87).

Tighten all of the 3/8” Nylon Locknuts (87) used in this step.

20

57
	16
	8
		97
		114
		99
58			114
	15		3
			114
59		20
	32
	51
		20
			108
	51	108
			33
			111
		84
60	87
	87	32
	127
			106
		126	37