Long and has an eyelet on each end | Weider 831.153931 specification

19.Route the Swivel High Cable (74) through the Swivel Upright (5) and over a 4 1/2” Pulley (119). Attach the Pulley inside the Upright with a 3/8” x 2 3/4” Bolt (101), two 3/8” Washers (91), two 1/2” Spacers (89), and a 3/8” Nylon Locknut (87).

Attach a 3/8” x 2 1/2” Bolt (18), two 3/8” Washers (91), and a 3/8” Nylon Locknut (87) to the Swivel Upright (5).

20.Remove the preattached 3 1/2” Pulleys (78) from the Small Pulley Plates (31).

Wrap the	Swivel High Cable (74)		over a 3 1/2”
Pulley (78). Attach the Pulley and a Cable Trap (68)
to the second set of holes from the top of the Small
Pulley Plates (31) with a 3/8” x 2” Bolt (100) and a
3/8” Nylon Locknut (87).		Make sure the Cable
Trap is turned to hold the Cable in the groove of
the Pulley.
21. Wrap the	Swivel High Cable (74)		over a 4 1/2”

Pulley (119). Attach the Pulley inside of the indicat-

ed bracket on the Top Frame (6) with 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).

22. Lift the Weight Tube (43) and the Top Weight (45)
closest to the Swivel Upright (5).			Make sure that the
small	pin	on the Weight Tube is inside of the groove
under	the	Top Weight.

Insert a Weight Pin (50) into the stack of Weights

(44). Place a 1/2” Washer (1) on top of the Weight

Tube (43). T ighten a 1/2” Nut (118) halfway onto the

end of the Sw ivel High Cable (74). Screw the end of the Cable two full turns into the Weight Tube. Then,

tighten the Nut against the 1/2” Washer.

23. Locate the Swivel Cable (17), which is 115	3/8”
long and has an eyelet on each end.	Attach the

Cable inside the Top Frame (6) with a 5/16” x 2 1/2”

Bolt (59), two 5/16” Washers (90), and a 5/16”

Nylon Locknut (86).

19			91		18
					18
		5
		5			101
					101
87	91				91
					91
				89
				89
91
87	89		119		74
			119
20
			74
			87
					100
			78	68	31
			31
21
					6
	93
					87
			119		74
22
					74
5					118
					118
50			45		1
			45
					43
					43
					44
23			59
			59		86
			90		86
					17
				6

19			91		18
					18
		5
		5			101
					101
87	91				91
					91
				89
				89
91
87	89		119		74
			119
20
			74
			87
					100
			78	68	31
			31
21
					6
	93
					87
			119		74
22
					74
5					118
					118
50			45		1
			45
					43
					43
					44
23			59
			59		86
			90		86
					17
				6

19			91		18
					18
		5
		5			101
					101
87	91				91
					91
				89
				89
91
87	89		119		74
			119
20
			74
			87
					100
			78	68	31
			31
21
					6
	93
					87
			119		74
22
					74
5					118
					118
50			45		1
			45
					43
					43
					44
23			59
			59		86
			90		86
					17
				6

Wrap the

Swivel High Cable (74)

Pulley (119). Attach the Pulley inside of the indicat-

long and has an eyelet on each end.

118

19			91		18
					18
		5
		5			101
					101
87	91				91
					91
				89
				89
91
87	89		119		74
			119
20
			74
			87
					100
			78	68	31
			31
21
					6
	93
					87
			119		74
22
					74
5					118
					118
50			45		1
			45
					43
					43
					44
23			59
			59		86
			90		86
					17
				6