Weider 831.153931 Important Precautions, Sure that the cables are on all of the pulleys, Decal

Page 3

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight system.

1.Read all instructions in this manual and in the accompanying literature before using the weight system.

2.It is the responsibility of the owner to ensure that all users of the weight system are ade- quately informed of all precautions.

3.The weight system is intended for home use only. Do not use the weight system in any commercial, rental, or institutional setting.

4.Use the weight system only on a level sur- face. Cover the floor beneath the weight sys- tem to protect the floor.

5.Make sure that all parts are properly tight- ened each time you use the weight system. Replace any worn parts immediately.

6.Keep children under 12 and pets away from the weight system at all times.

7.Keep hands and feet away from moving parts.

8.Always wear athletic shoes for foot protection.

9.The weight system is designed to support a

a maximum user weight of 300 pounds.

10.The weight system should not be used by more than one person at a time.

11.Always stand on the foot plate when per- forming an exercise that could cause the weight system to tip.

12.Never release the butterfly arms, leg lever, squat arm, lat bar, row bar, or handle while weights are raised. The weights will fall with great force.

13.Always disconnect the lat bar from the weight system when performing an exercise that does not use the lat bar.

14.Make sure that the cables remain on the pul- leys at all times. If the cables bind while you are exercising, stop immediately and make

sure that the cables are on all of the pulleys.

15.If you feel pain or dizziness at any time while exercising, stop immediately and begin cool- ing down.

16.The warning decals shown here have been placed on the weight system in the locations shown on page 4. If a decal is missing or illegible, please call our toll-free HELPLINE at

1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time, to order a free replacement decal. Place the decal on

the weight system in the location shown.

Keep hands and fingers clear of this area.

Decal 2

Decal 1

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. SEARS assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

3

Image 3
Contents Model No Serial No Serial Number Decal under seatPatent Pending Table of Contents Decal Important PrecautionsWeight system in the location shown Sure that the cables are on all of the pulleysBefore YOU Begin Using the weight systemAssembly Them in place Each Carriage Bolt. Do not tighten the Nylon Locknuts yet Nylon LocknutsDo not tighten the Nylon Locknuts yet En the Nylon Locknuts yet Hole in the Swivel Upright AdjustmentTwo indicated 5/16 x 2 1/2 Carriage Bolts 110 Locknut 86 onto each Carriage BoltGrooved side is facing downward Make sureDo not tighten the Locknuts yet Easily With the Bolt and a 3/8 Nylon JamnutMust be able to pivot easily. R 8 Nylon Jamnut 113 as shownLong and has an eyelet on each end Attach the end of the Swivel Cable 17 to Cable in the groove of the PulleyBolt 100 and a 3/8 Nylon Locknut Groove of the PulleyLocknut 87. Make sure that the Long Cable A 3/8 Nylon JamnutPulley Locate the Butterfly Cable 69, which isEd pin on the other end Locate the Leg Lever Cable 75, which isA 3/8 Nylon Locknut 119 122 121 113 Cage 120 Upright 3 with a 3/8 x 3 3/4 Bolt 122, a 3/8Washer 91, and a 3/8 Nylon Jamnut End and a ball on the other endA 3/8 Nylon Locknut 120 With a 3/8 x 2 Bolt 100 and a 3/8 Nylon124 OnlyNylon Locknut 120 A 3/8 Nylon JamnutStack. Replace the Pin A 3/8 Nylon LocknutNut 118 halfway onto the end Nut against the 1/2 Washer 1. RemRepeat this step with the other end of the Squat Arm Nylon Locknuts yetTighten all of the 3/8 Nylon Locknuts 87 used in this step Backrest than the top. Attach the Squat Backrest to Adjustments PressIng any exercise 115 Adjusting the Squat ARM or Swivel CarriageLbs Top Weight Resistance ChartPulley and the Cable Trap between the higher set TroubleshootingCable Diagrams ButterflySwivel High Cable Leg Lever CableSwivel Low Full 90 DAY Warranty Bags, check to see if it has been pre-assembled X 3 3/4 Bolt R1202APage Round Inner Cap 2 x 2 Inner Cap 2 1/2 Inner Cap Save this Part LIST/EXPLODED Drawing for Future Reference Key Qty Description Part LIST-Model NoExploded