Weider 831.159830 user manual Seat Assembly, Locate and open the parts bag labeled Seat

61. Attach the Press Cable (72) to the remaining “U”-	61
Bracket (33) with a 1/4” Washer (99) and a 1/4”
Nylon Locknut (103). Note: Do not completely	72
tighten the Nylon Locknut; it should be				96
threaded only two turns onto the end of the			33
Cable, as shown in the inset drawing.	86		99
	43
Attach the “U”-Bracket (33) to the Long Weight			103
					72
Tube (43) with a 5/16” x 1 3/4” Bolt (96) and a
5/16” Nylon Locknut (86).
Important: Follow all five cables from end to
end and make sure that they rest in the					103
grooves of all of the pulleys and that the
cables and the pulleys move smoothly.
Seat Assembly	62
62. Locate and open the parts bag labeled “SEAT	25		99	79
ASSEMBLY.”
Attach the Butterfly Backrest (25) to the Butterfly			4
Upright (4) with two 1/4” x 2 1/2” Bolts (79) and
two 1/4” Washers (99).				79
			99
63. Insert a 1/4” x 2 1/2” Carriage Bolt (91) through	63
the center hole in a Seat Plate (30). Attach the
	23
Seat Plate to a Seat (23) with two 1/4” x 3/4” Bolt
(98).
Insert the 1/4” x 2 1/2” Carriage Bolt (91) into the			91
indicated hole in the Butterfly Seat Frame (10)			30
and secure it with a 1/4” Washer (99) and a 1/4”
Nylon Locknut (103). Secure the other end of the			98
Seat (23) with a 1/4” x 2 1/2” Bolt (79) and a 1/4”
Washer.
Attach the other Seat (23) to the Press Seat			99
Frame (12, not shown) in the same manner.			103
			79
64. Insert a 1/4” x 2 1/2” Carriage Bolt (91) through	64
the center hole in a Seat Plate (30). Attach the
					79
Seat Plate to the Press Backrest (24) with two
					99
1/4” x 3/4” Bolt (98).
	24			5
Insert the 1/4” x 2 1/2” Carriage Bolt (91) into the
indicated hole in the Press Upright (5) and secure					103
it with a 1/4” Washer (99) and a 1/4” Nylon			98
	30				99
Locknut (103). Secure the other end of the Press
Backrest (24) with a 1/4” x 2 1/2” Bolt (79) and
another 1/4” Washer.		91
	23