Weider 831.159830 Do not tighten the 5/16 Nylon Locknuts Yet, Tighten the Nylon Locknuts yet

7. Slide the Butterfly Leg (11) onto the two 5/16” x	7		86
2 1/2” Carriage Bolts (75) in the Butterfly Base
		10		89
(1). Hand tighten two 5/16” Nylon Locknuts (86)
onto the Bolts.
Attach the Butterfly Seat Frame (10) to the			86	100
Butterfly Upright (4) with two 5/16” x 2 3/4” Bolts	11
(89), two 5/16” Washers (100), and two 5/16”
			4
Nylon Locknuts (86).
		86
	86
Do not tighten the 5/16” Nylon Locknuts (86)
yet.
			75
8. Press a 1” Square Inner Cap (69) into the small	8
tube on the Press Upright (5).
Slide the Press Upright (5) over the indicated
5/16” x 2 1/2” Carriage Bolts (75) in the Press
Base (3). Hand tighten two 5/16” Nylon Locknuts		5
(86) onto the Bolts. Do not tighten the Nylon
Locknuts yet.
Slide the Upright Support (6) over the 3/8” x			86
2 1/2” Carriage Bolt (76) and the 3/8” x 4”
Carriage Bolt (112) in the Press Base (3). Hand
tighten a 3/8” Nylon Jamnut (92) onto the 3/8” x
2 1/2” Carriage Bolt. Do not tighten the Nylon
Jamnut yet. Note: Do not thread a Nylon			86	6
Jamnut onto the 3/8” x 4” Carriage Bolt yet.
	75
Attach the Upright Support (6) to the Press
Upright (5) with two 5/16” x 2 1/2” Carriage Bolts
(75) and two 5/16” Nylon Locknuts (86). Do not			92
tighten the Nylon Locknuts yet.
			86
	69
	86			112
	3		76
			75
9. Press a 2” Square Inner Cap (67) into the Press	9		89
Seat Frame (12). Attach a Bumper (50) to the
				86
Press Seat Frame with a 1” Tap Screw (80).		12
Slide the Press Seat Frame (12) onto the indicat-	67		89	100
ed 5/16” x 2 1/2” Carriage Bolts (75) in the Press
Base (3). Hand tighten two 5/16” Nylon Locknuts	50		5
(86) onto the Bolts. Do not tighten the Nylon
	80	86
Locknuts yet.
Attach the Press Seat Frame (12) to the Press	86
Upright (5) with two 5/16” x 2 3/4” Bolts (89), two			3
5/16” Washers (100), and two 5/16” Nylon		75
Locknuts (86). Do not tighten the Nylon
Locknuts yet.
	8