Weider 831.159830 user manual Remove another V-Pulley 34 from the bag Labeled Pulley BAG

25. Remove the 3 1/2” Pulleys (35) from the Double	25
“U”-Bracket (31).
Wrap the Butterfly Cable (73) around a 3 1/2”	73
Pulley (35). Attach the Pulley to the Double “U”-			90
Bracket (31) with a 3/8” x 1 3/4” Bolt (94) and a
3/8” Nylon Locknut (90).	94
			35
	31
26. Remove another “V”-Pulley (34) from the bag	26
labeled “PULLEY BAG 2.”			105
Wrap the Butterfly Cable (73) around the “V”-	73		34
			37
Pulley (34) in the direction shown. Attach the
Pulley and a Long Cable Trap (37) to the bracket
on the back of the Butterfly Upright (4) with a
3/8” x 2 1/2” Bolt (105) and a 3/8” Nylon Locknut
(90). Make sure the Long Cable Trap is orient-			90
ed as shown.
		4
27. Attach the Butterfly Cable (73) to the bracket on	27
the Right Butterfly Arm (19) with a 5/16” x 1”
		77
Shoulder Bolt (84) and a 5/16” Nylon Jamnut (77).
	19
		73
		84
28. Identify the Rear Cable (70). It is approximately	28
95 1/8” long, and it has an eyelet on one end and
	90	97
a threaded shaft on the other.			8
Attach the eyelet on the Rear Cable (70) inside			97
			82
the Center Top Frame (8) with a 3/8” x 2 3/4” Bolt
(82), two 3/8” Washers (97), and a 3/8” Nylon
Locknut (90).
			70
	14