Weider 831.159830 user manual Trap is positioned to hold the Cable Groove of the Pulley

33. Remove the 3 1/2” Pulleys (35) from the other	33
pair of pre-assembled Pulley Plates (32).
Wrap the Ab Cable (74) around a 3 1/2” Pulley
(35) in the direction shown. Attach the Pulley and
a Cable Trap (38) to the top hole in the pair of					74
Pulley Plates (32) with a 3/8” x 2” Bolt (93) and a
3/8” Nylon Locknut (90). Make sure the Cable					93
Trap is positioned to hold the Cable in the
groove of the Pulley.	90			35	32
		32
				38
34. Wrap the Ab Cable (74) around a 3 1/2” Pulley	34
(35) in the direction shown. Attach the Pulley to
the Double “U”-Bracket (31) with a 3/8” x 1 3/4”	94
Bolt (94) and a 3/8” Nylon Locknut (90).
	31
	90
	35
	74
35. Wrap the Ab Cable (74) around a 3 1/2” Pulley	35
(35) in the direction shown. Attach the Pulley and
				74
a Cable Trap (38) to the indicated bracket on the		93
Butterfly Base (1) with a 3/8” x 2” Bolt (93) and a				35
3/8” Nylon Locknut (90). Make sure the Cable				38
Trap is positioned to hold the Cable in the
groove of the Pulley.
		1		90
36. Wrap the Ab Cable (74) around a 3 1/2” Pulley	36
(35) in the direction shown. Slide a Cable Trap
(38) and the Pulley onto the 3/8” x 3 1/2” Carriage	35		92
Bolt (95) in the Butterfly Base (1). Secure the
Pulley with a 3/8” Nylon Jamnut (92). Make sure	38
the Cable Trap is positioned to hold the Cable	74
in the groove of the Pulley.
	1	95
	16