Weider WESY59101 user manual Weight Cable has a bolt, and the other End has a ball on it

31. Locate the Weight Cable (72). Note that one end		31
of the Weight Cable has a bolt, and the other
end has a ball on it.
Lay the Weight Cable (72) inside the bracket on the			3
Butterfly Base (4) in the manner shown. Attach a					24
3 1/2” Pulley (24) to the bracket with a 3/8” x 2” Bolt						54
(54) and a 3/8” Nylon Locknut (50).	Be sure the
Weight Cable is in the groove of the 3 1/2”			4			72
Pulley.
				50
				Bracket
32. Wrap the Weight Cable (72) around a 3 1/2” Pulley		32
(24). Attach a 3/8” Flat Washer (48) and a 5/8” x				3
3/4” Bushing (66) to a 3/8” x 3 1/4” Bolt (62). Slide
the Bolt through the Butterfly Front Leg (3) and the						62
3 1/2” Pulley. Secure another 5/8” x 3/4” Bushing					48
and 3/8” Flat Washer to the Bolt with a 3/8” Nylon
Locknut (50).
						24
						72
		50				66
				48
33. Insert the Weight Cable (72) through the hole in the		33			41
Leg Lever (41), up around a 3 1/2” Pulley (24),
					48
back through the hole in the Leg Lever, and through
			72
the upper hole in the Butterfly Front Leg (3).				3		89
						24
Attach the 3 1/2” Pulley (24) and two 5/8” x 1/2”
Bushings (99) to the Leg Lever (41) with a 3/8” x
2 3/4” Bolt (89), two 3/8” Flat Washers (48), and a
3/8” Nylon Locknut (50).						99
			48
		50
34. Lay the Weight Cable (72) under a 3 1/2” Pulley		34
(24) as shown. Attach the 3 1/2” Pulley to the
bracket on the Butterfly Base (4) with a 3/8” x 2”
Bolt (54) and a 3/8” Nylon Locknut (50).			72
				24	54
		4
			50
				Bracket
		14