How to use your dryer
1.Plug in, switch on electricity.
WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY
2.Sort your laundry (see section “Sorting Your Laundry”)
3.Open the door. Check that the fluff filter is clean. Lift filter upwards, clean away any fluff, replace filter correctly.
4.Load the dryer, placing the clothes carefully in the drum pushing them well towards the back and away from the door seal. Close the door.
5.Select the relevant heat setting (see section “The Controls”). When low heat is selected (switch in out position) the green indicator mark is visible. Automatic programs will NOT function on Low Heat.
Button Out
LOW HEAT
Button In
HIGH HEAT
6.Select drying time required. Automatic drying, average loads ✻
Automatic drying, large loads ✽. OR Timed Drying of up to 70 minutes for small loads or low heat settings.The dryer will start (providing a delay time has not been set). See section “The Controls”.
7.When finished, open the door and take out the laundry. Clean and replace the fluff filter.
8.Switch off electricity and remove plug from socket.
WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY
8