Miele W 1930I operating instructions Program selection

Page 14

Program selection

Program

Temperature range

Fabric

 

 

 

COTTONS

85 - 105°F

For dark colored items.

For cotton fabrics without

105 - 120°F

For light colored items.

special finishes.

140 - 170°F

Exclusively white items.

 

 

 

PERMANENT PRESS

85°

For dark fabrics which are a blend or 100%

For cotton blends, polyester

 

synthetic fabrics.

blends and synthetics such

105 - 120°F

For light colored cotton or synthetic items.

as acrylic, nylon and ramie.

140°F

For white polyester/cotton items.

 

 

 

FINE/DELICATES

cold - 85°F

For dark colored silks and all synthetic items

For synthetics, machine

 

(lingerie).

washable silks, lace or

105 - 120°F

For light colored silks and lace tablecloths.

crocheted (non-woolen)

140°F

For white cotton lace and crocheted items.

items, curtains and knits.

 

 

 

 

 

WOOLENS

cold - 105°F

For all colors of wool and silk.

For all machine washable

 

(There is no Pre-wash option in this

woolens and wool blends.

 

proram).

Also suitable for silks.

 

 

 

 

 

Starch

cold

For tablecloths, napkins, aprons and shirts.

 

 

 

Spin

 

For spinning wet items not washed in the

 

 

machine (hand washed). Such items must

 

 

be suitable for machine spinning.

 

 

 

Drain

 

For use when the laundry is to be removed

 

 

wet for drip drying. Normally used in

 

 

conjunction with “Without final spin”.

 

 

 

Fine rinse

 

For hand washed items that can be gently

 

 

rinsed, and if desired, spun.

 

 

 

14

Image 14
Contents For the W 1930i Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of the packing material Disposal of your old machineEconomical usage EconomyPrepare the wash load Preparing the LaundryBefore washing Recommended load sizes are noted below To start a programPress the Door button to open the door Load the machine Close the machine doorClose the drum door End of ProgramAfter washing To interrupt a program To cancel a programChanging the program sequence To change an incorrectly selected programAdding detergent Starch Using the Starch program to dis- pense liquid starchAdding fabric softener or starch Program selection 11 lbs Interim rinse Program sequenceExplanations Graduated rinseFinal spin Starch Spin Fine rinseGraduated spin WoolensWashing C Textile care symbolsTemperature Conversion Chart Tumble dryWater plus Additional optionsPre-wash Gentle washTime display Hmin Delay start/Time remaining indicatorDelay Start Remaining timeCleaning the detergent drawer User Maintenance Instructions Cleaning and careCleaning the washing machine Cleaning and care Cleaning the drain pump and lint trapCleaning and Care To clean the filter in the inlet valve Cleaning the water inlet filtersTo clean the filter in the inlet hose Start? Problem solving guideProgram does not Check p / q indiWhat to do if Cause Remedy There is an excessive Into the machine? Large residues of deterDrawer? Build-up of foam?Give the required result? Grey greasy particlesCling to washed laundry? After washing pilling apOpening the drum door in the event of a power failure To check water pressure Electric socketAfter sales service Installation Installation Instructions InstallationInstallation surface Removing the shipping strutsInstallation Levelling the machine BuildingMatching the control panel to the adjacent washer fronts Please note the followingInstalling the front panel Plate locations 1 and 2 onlyInstallation Sizing the toekick Installing the toekick Washer-Dryer stackWater hardness reminder Plumbing Connection to the drain sys- temElectrical connection Grounding Instructions5th Rinse in the Cottons program Operating Instructions Programmable functionsHigh water level only in Cottons rinses No water intake through compartmentProgrammable functions StepDProgram Lock Child safety feature Desired function AHigh water level B5th rinse cycleAdditional rinse in Rapid wash Carry out Steps 1 to To check if the function has been storedDeleting the additional func- tions Installation Instructions Technical data DimensionsTechnical data Page Page